FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
| Stereo Component Equalizer Assembly | ·
Generates electrical driving sounds based on the vehicle speed, accelerator pedal opening angle, acceleration and drive mode signals. ·
Generated electrical driving sound signals are output from the No. 2 speaker with box assembly and No. 3 speaker with box assembly. |
| Vehicle Sound Switch | Turns the ASC system on and off. |
| No. 2 Speaker with Box Assembly | Emits sounds based on the signal from the stereo component equalizer assembly. The speaker output sound is reverberated in the box. |
| No. 3 Speaker with Box Assembly | |
| EV Control ECU | Sends information such as the accelerator pedal depression amount, shift lever position and the drive mode to the stereo component equalizer assembly. |
| Brake Actuator Assembly
·
No. 2 Skid Control ECU |
Sends vehicle speed signals to the stereo component equalizer assembly via CAN communication. |
| Airbag ECU (Airbag ECU Assembly) | Detects the acceleration of the vehicle and transmits signals to the EV control ECU. |
OPERATING CONDITION
Driving Sound Operation Conditions
| Item | Condition | ||
|---|---|---|---|
| Drive Mode Select | ECO | NORMAL | SPORT |
| Vehicle Speed | - | 12 km/h (7.5 mph) or higher | |
| Acceleration | - | 0.7 m/s2 or higher | 0 m/s2 or higher |
| Accelerator Pedal Opening Angle | - | 0% or more | 0% or more |
| Tone | No sound | Jet sound | Motor sound |
| *a | Driving Sound Emission Image | *b | Vehicle Speed |
| *c | Time | *d | Sound Output |
| *e | During Acceleration | *f | When Driving at Constant Speed |
| *g | During Deceleration | *h | 12 km/h (7.5 mph) or Higher |
| *i | 0.7 m/s2 or Higher | - | - |
| *a | Driving Sound Emission Image | *b | Vehicle Speed |
| *c | Time | *d | Sound Output |
| *e | During Acceleration | *f | When Driving at Constant Speed |
| *g | During Deceleration | *h | 12 km/h (7.5 mph) or Higher |
| *i | 0 m/s2 or Higher | - | - |
SID Sound Emission Conditions (Emitted when all of the following conditions are met)
The ignition switch is ON.
The vehicle sound switch is on.
The drive mode is switched by the pattern select switch assembly.
SYSTEM CONTROL
The stereo component equalizer assembly outputs the following sounds based on the vehicle information from each ECU (drive mode, vehicle speed, and accelerator pedal opening angle, etc.)
| Sound | Description |
|---|---|
|
*1: SPORT mode *2: NORMAL mode |
|
| Driving Sound | ·
The ASC system outputs a driving sound when the vehicle is being driven. ·
A driving sound is output when the accelerator pedal opening angle is 0% or more, the vehicle speed is 12 km/h (7.5 mph) or higher, and the acceleration is 0 m/s2 or higher.*1 ·
A driving sound is output when the accelerator pedal opening angle is 0% or more, the vehicle speed is 12 km/h (7.5 mph) or higher, and the acceleration is 0.7 m/s2 or higher.*2 |
| SID Sound | Emits when the drive mode is switched by the pattern select switch assembly. |
DIAGNOSIS
If the stereo component equalizer assembly detects a malfunction in the ASC system, Diagnostic Trouble Codes (DTCs) are stored in the stereo component equalizer assembly.
The 5-digit DTCs can be read by connecting the Global TechStream (GTS) to the DLC3. For details, refer to the Repair Manual.