FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
| Integration Control Sub-assembly | ·
Combines the screen received from the audio head unit with other operation screens such as the control menus for the air conditioner, seat heater, etc., then outputs the combined image signal to the multi-display assembly. ·
Sends operation signals received from the multi-display assembly to the audio head unit and the ECU of each respective system. |
| Multi-display Assembly | ·
Decodes and displays the image signal received from the integration control sub-assembly. ·
Sends touch operation signals to the integration control sub-assembly and audio head unit. |
| Audio Head Unit (Radio Receiver Assembly) | Sends the multimedia screen signal to the integration control sub-assembly. |
FUNCTION
Toyota Multi Operation Touch System Display Function
The following items can be operated or displayed using the Toyota multi operation touch system:
| System | Function* | Display/Operation Item* |
|---|---|---|
|
*: Depending on the vehicle specifications, each item or switch may not be displayed. |
||
| Air Conditioning | Front Side | A/C |
·
FAST/ECO ·
ECO HEAT/COOL |
||
| Recirculation/Fresh Air Mode | ||
·
3-ZONE ·
DUAL |
||
| Switches Air Outlet Mode | ||
| Temperature Setting (for Driver Side) | ||
| Temperature Setting (for Passenger Side) | ||
| Airflow Volume | ||
| Rear Side | Switches Air Outlet Mode | |
| Temperature Setting | ||
| Option | S-FLOW Setting | |
| Windshield Deicer Setting | ||
| Seat/Steering | Seat (Driver Side) | Seat Heater Temperature Setting |
| Climate Control Seat Airflow Volume Setting | ||
| Seat (Passenger Side) | Seat Heater Temperature Setting | |
| Climate Control Seat Airflow Volume Setting | ||
| Steering Wheel Heater | Steering Wheel Heater Temperature Setting | |
| All AUTO | All AUTO Setting | |
| Audio | Audio | Screen Display of the Selected Audio Source |
| ECO | Energy Monitor | Energy Monitor Display |
| Fuel Consumption | Fuel Consumption Display | |
| Air Purification | Air Purification Display | |
| Vehicle Settings | Setting | Illumination Color |
| Slide Operation | ||
| Software Information | ||
Customize Parameters
By selecting "Setting", the following items can be customized:
| Item | Details |
|---|---|
| Illumination Color | The interior illumination color can be changed. |
| Slide Operation | The flick function can be set to on or off. |
DIAGNOSIS
In order to make system inspections easier to perform, a diagnosis function is used in consideration of serviceability. The DTCs of malfunctioning parts can be read by connecting the Global TechStream (GTS). Refer to the Repair Manual for details.