Home › Vehicle Exterior › WIPER / WASHER › WIPER AND WASHER SYSTEM
NM37H0E _59 Vehicle Exterior _097226 WIPER / WASHER _0455393 WIPER AND WASHER SYSTEM CO CONTROL F

WIPER / WASHER  WIPER AND WASHER SYSTEM  CONTROL  CAMERA CLEANER CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function
Windshield Wiper Switch Assembly
·

Rear Camera Washer Switch


Operates the camera cleaner system and sprays washer fluid on the surface of the camera lens according to rear camera washer switch operation.
Steering Sensor Receives rear camera washer switch operation signals from the windshield wiper switch assembly and sends them to the main body ECU (multiplex network body ECU) via the central gateway ECU (network gateway ECU).
Central Gateway ECU (Network Gateway ECU) Relays signals between the CAN communication lines.
Main Body ECU (Multiplex Network Body ECU) Sends washer motor and pump assembly operation signals based on rear camera washer switch operation signals.
Windshield Wiper Relay Receives operation signals from the main body ECU (multiplex network body ECU) and operates the washer motor and pump assembly.
Washer Motor and Pump Assembly Operates according to windshield wiper relay signals and sprays washer fluid from the camera washer.
Camera Cleaner Nozzle Sprays washer fluid output by the washer motor and pump assembly.


SYSTEM CONTROL


a.

When the rear camera washer switch is operated, the camera cleaner system operates.



OPERATING CONDITION


a.

Camera Cleaner System Operation and Cancel Conditions

i.

The camera cleaner system operates when all of the following conditions are met.

·

The ignition switch is turned to ON.

·

The rear camera washer switch is operated.



ii.

The camera cleaner system stops operating when either of the following conditions is met.

·

The ignition switch is turned from ON to ACC or off.

·

The rear camera washer switch operation is stopped.