CONSTRUCTION
Pulling the manual switch locks the parking brake and pressing the manual switch releases the parking brake.
Braking force is only generated while the electric parking brake switch is pulled up when the vehicle is in motion. The braking force is generated by hydraulic pressure, and while the braking force is being generated, the brake light illuminates. When the switch is released, the braking force decreases.
When the electric parking brake switch is pulled and held for 3 seconds or more with the parking brake locked, the auto function turns on. Then a piece of information is displayed on the multi-information display indicating that the auto function is on.
When switching from the parking brake released condition, it is necessary to pull it for 5 seconds or more.
When the electric parking brake switch is pushed and held for 3 seconds or more with the parking brake released, the auto function turns off. Then a piece of information is displayed on the multi-information display indicating that the auto function is off.
When switching from the parking brake locked condition, it is necessary to press it for 5 seconds or more.
| *1 | Electric Parking Brake Switch Assembly | - | - |