FUNCTION OF MAIN COMPONENTS
| Component | Function | |
|---|---|---|
| Headlight ECU Sub-assembly RH | Receives daytime running light control signals and illuminates the daytime running lights. | |
| Headlight ECU Sub-assembly LH | ||
| Main Body ECU (Multiplex Network Body ECU) | Receives various signals and transmits the daytime running light control signal. | |
| Steering Sensor | Sends the light control switch position signal to the main body ECU. | |
| Turn Signal Switch | Light Control Switch | Sends the light control switch position signal to the steering sensor. |
| Automatic Light Control Sensor | Detects the ambient light level and transmits a signal to the main body ECU. | |
| Brake Actuator Assembly | No. 2 Skid Control ECU | Sends the parking brake operation signal to the main body ECU. |
| EV Control ECU | Sends the READY signal to the main body ECU. | |
| Multi-display Assembly | Displays the settings screen. | |
| Central Gateway ECU (Network Gateway ECU) | Relays the signal between the CAN communication lines. | |
SYSTEM CONTROL
Operating Condition
The daytime running lights illuminate when the following conditions are all met.
The READY signal is input.
The light control switch is in the, AUTO position (and the taillights are not turned on via the automatic light control system).
The parking brake is released.
FUNCTION
The daytime running light system is designed to automatically illuminate the Light Emitting Diode (LED) lights during the daytime to keep the vehicle highly visible to other vehicles.
The daytime running light system can be turned on and off using the customization function. For details, refer to the Repair Manual.