Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › PEDESTRIAN PROTECTION SYSTEM
NM37H0E _58 Vehicle Interior _097454 SUPPLEMENTAL RESTRAINT SYSTEMS _0456776 PEDESTRIAN PROTECTION SYSTEM DE DETAILS F

SUPPLEMENTAL RESTRAINT SYSTEMS  PEDESTRIAN PROTECTION SYSTEM  DETAILS  AIRBAG ECU ASSEMBLY  


CONSTRUCTION


a.

The airbag ECU assembly consists of judgment circuits, an ignition control circuit, a backup power circuit, a diagnostic circuit and a memory circuit.

Item Outline
Judgment Circuit Judgment circuits are built into the airbag ECU assembly to judge the severity of a collision using the pressure signal from the pedestrian protection sensors.
Ignition Control Circuit The ignition control circuit performs calculations based on the signal output from the judgment circuit of the airbag ECU assembly and pedestrian protection sensors. If the calculated values are greater than the specified values, the pop up hood lifters are deployed.
Backup Power Circuit The backup power circuit consists of a power supply capacitor and a DC-DC converter. When the power supply to the airbag ECU assembly is disrupted during a collision, the power supply capacitor discharges and supplies electric power to the system. The DC-DC converter operates as a boosting transformer when the auxiliary battery voltage falls below a predetermined level.
Diagnostic Circuit The diagnostic circuit constantly monitors the system for malfunctions. When a malfunction is detected, it turns on the pop up hood warning indicator and master warning indicator in the combination meter assembly to inform the driver.
Memory Circuit When a malfunction is detected by the diagnostic circuit, a DTC is stored in memory.