CONSTRUCTION
Pop up hood lifters, which raise the rear portion of the engine hood, are positioned inside the rear of the engine hood on the hood hinge assemblies on the left and right sides.
A non-disassembly type pop up hood lifter, which is composed of a case, inflator and piston, is used.
| *1 | Pop Up Hood Lifter Assembly RH | *2 | Inflator |
| *3 | Piston | *4 | Case |
| *5 | Pop Up Hood Lifter Assembly LH | - | - |
| *a | A - A Cross Section | - | - |
OPERATION
When the pedestrian protection sensor detects a collision, the pop up hood lifter starts to operate.
| *1 | Hood Hinge Assembly RH | *2 | Rear Pop Up Hood Lifter RH (No. 2 Pop Up Hood Lifter Assembly RH) |
| *1 | Pop Up Hood Lifter Assembly RH | *2 | Hood Hinge Assembly RH |
When the rear pop up hood lifter extends, the shear pin that fixes the arm of the hood hinge assembly breaks into 2 pieces and the arm separates.
| *1 | Hood Hinge Assembly RH | *2 | Pop Up Hood Lifter Assembly RH |
| *3 | Shear Pin | - | - |
| *a | Arm Fixed Portion | - | - |
When the pop up hood lifter extends further, it raises the engine hood. When the pop up hood lifter fully extends, it locks to keep the engine hood raised.
| *1 | Hood Hinge Assembly RH | *2 | Pop Up Hood Lifter Assembly RH |