SYSTEM CONTROL
Front seat heater
Timer control is available for the front seat heaters. When the front seat heater switch displayed on the multi-display assembly* and air conditioning control assembly (refreshing seat switch) is turned on, "Hi" is selected. The seat heater system sets the operation time according to factors such as the outside temperature and interior temperature. The set temperature will be changed to a lower mode in stages (Hi → Mid → Lo).
*: Models with multi-display assembly
When the front seat heater switch displayed on the multi-display assembly* and air conditioning control assembly (refreshing seat switch) is turned on, the air conditioning amplifier assembly detects the set temperature stored in the front seat heater switch displayed on the multi-display assembly* and air conditioning control assembly (refreshing seat switch) and at the same time detects the actual seat cushion heater temperature using the seat heater sensor built into the front seat cushion heater, the air conditioning amplifier assembly will then supply the required amount of power to the front seat heater to adjust the seat cushion heater temperature to the set temperature. In addition, the air conditioning amplifier assembly shuts off power to the front seat heater when the seat cushion heater temperature reaches approximately 44°C (111°F) [Hi], 37°C (99°F) [Mid] or 30°C (86°F) [Lo], and reapplies power when the seat cushion heater temperature drops to approximately 43°C (109°F) [Hi], 36°C (97°F) [Mid] or 29°C (84°F) [Lo].
*: Models with multi-display assembly
| *1 | Front Seat Heater Switch LH | *2 | ALL AUTO Switch |
| *3 | Front Seat Heater Switch RH | - | - |
| *a | The illustration shown is examples only. | - | - |
| *1 | Front Seat Heater Switch LH/Indicator Light | *2 | Seat Heater/Climate Auto Mode Switch LH |
| *3 | Seat Heater/Climate Auto Mode Switch RH | *4 | Front Seat Heater Switch RH/Indicator Light |
| *a | The illustration shown are example only. The settings of each switch and display differ depending on the specifications. | - | - |
Rear seat heater
A touch panel style cooler control switch assembly is provided in the rear center armrest assembly. An indicator is also placed there to make it possible to confirm the operation status.
When a rear seat heater switch on the cooler control switch assembly is turned on, the air conditioning amplifier assembly detects the set temperature stored in the cooler control switch assembly and at the same time detects the actual seat cushion heater temperature using the seat heater sensor built into the rear seat cushion heater, the air conditioning amplifier assembly will then supply the required amount of power to the rear seat heater to adjust the seat cushion heater temperature to the set temperature. In addition, the air conditioning amplifier assembly shuts off power to the rear seat heater when the seat cushion heater temperature reaches approximately 44°C (111°F) [Hi], 37°C (99°F) [Mid] or 30°C (86°F) [Lo], and reapplies power when the seat cushion heater temperature drops to approximately 43°C (109°F) [Hi], 36°C (97°F) [Mid] or 29°C (84°F) [Lo].
| *1 | Models with Rear Seat Heater System | *2 | Rear Seat Heater Switch RH |
| *3 | Indicator Light | - | - |
| *a | The illustration shown is examples only. | - | - |