OUTLINE
For the FC system, the Q710 FCV transaxle with motor assembly has been adopted.
The Q710 FCV transaxle with motor assembly is composed of the electric motor (traction motor) that provides motive force, the motor reduction mechanism that amplifies motor force and transfers it to the output axle, the reduction mechanism comprising the counter gear pair and the final gear pair, and the differential mechanism.
Lubrication for each gear is performed by the trochoid oil pump on the second shaft and by oil scraped up by the final driven gear, etc. By using a lubricating system that scoops up gear oil, oil pump drive losses can be reduced, resulting in increased transmission efficiency for the drive system. Also, by using an electric oil pump (oil pump with motor assembly) and oil cooler assembly and optimizing the oil flow, a high efficiency / high output powertrain with a high level of cooling performance has been realized.
| *1 | Electric Motor (Traction Motor) | *2 | Parking Lock Gear |
| *3 | Shift Control Actuator Assembly | *4 | Counter Drive Gear |
| *5 | Counter Driven Gear | *6 | Final Drive Gear |
| *7 | Oil Pump | *8 | Final Driven Gear |
| *9 | Differential Gear Unit | - | - |
The electronic shift lever system is a shift control system using a shift-by-wire technology.
SPECIFICATION
| Item | Specification | |
|---|---|---|
| Shift Pattern | P/R/N/D/Br | |
| Counter Gear | No. of Drive Gear Teeth | 15 |
| No. of Driven Gear Teeth | 49 | |
| Final Gear | No. of Drive Gear Teeth | 19 |
| No. of Driven Gear Teeth | 68 | |
| Oil Type | Toyota Genuine ATF WS | |