Home › Drivetrain › Q710 (HYBRID TRANSMISSION / TRANSAXLE) › HYBRID TRANSAXLE SYSTEM
NM37H0E _52 Drivetrain _097278 Q710 HYBRID TRANSMISSION / TRANSAXLE _0462239 HYBRID TRANSAXLE SYSTEM DE DETAILS F

Q710 HYBRID TRANSMISSION / TRANSAXLE  HYBRID TRANSAXLE SYSTEM  DETAILS  DIFFERENTIAL PRE-TORQUE MECHANISM  


CONSTRUCTION


a.

A differential pre-torque mechanism, in which the conical spring is located between the side gear and the side gear washer, is used.


b.

The load of the conical spring applies a friction force to the sliding area, improving straightline stability and steering stability.


c.

At light load and low differential rotation speeds, due to the friction force of the sliding area, the differential limit torque for the left and right wheels is achieved within the range of the conical spring allowable load. At middle and high load ranges, which are beyond the allowable load of the conical spring, the system performs as an open differential.

X144798C03
6.042,0.958 6.458,0.542 true 5.823,1.271 6.438,1.375 true 4.729,0.885 5.51,1.135 true 4.719,1.594 5.708,1.146 true 4.573,0.802 5.156,1.344 0.583,0.542 10 false *1 4.552,1.542 5.156,2.052 0.604,0.51 10 false *2 6.469,1.323 6.938,1.771 0.469,0.448 10 false *3 6.458,0.396 6.896,0.729 0.438,0.333 10 false *4 4.531,0.354 5.094,0.917 0.563,0.563 10 false *a 4.51,2 5.052,2.354 0.542,0.354 10 false *b
*1 Side Gear *2 Conical Spring
*3 Side Gear Washer *4 Differential Case
*a Light Load Range *b Middle and High Load Range


Relationship Diagram between Ring Gear Torque and Differential Limit Torque
X117332E04
1.302,1.479 2.313,1.958 1.01,0.479 10 false Differential Limit Torque 3.198,2.323 4.458,2.594 1.26,0.271 10 false Ring Gear Torque 5.438,0.365 6.698,0.635 1.26,0.271 10 false : With Mechanism 5.438,0.729 6.99,1 1.552,0.271 10 false : Without Mechanism