Home › Drivetrain › Q710 (HYBRID TRANSMISSION / TRANSAXLE) › HYBRID TRANSAXLE SYSTEM
NM37H0E _52 Drivetrain _097278 Q710 HYBRID TRANSMISSION / TRANSAXLE _0462239 HYBRID TRANSAXLE SYSTEM DE DETAILS F

Q710 HYBRID TRANSMISSION / TRANSAXLE  HYBRID TRANSAXLE SYSTEM  DETAILS  OIL SLING TYPE LUBRICATION MECHANISM  


CONSTRUCTION


a.

Using the rotation of the final driven gear to scoop up oil, a scooping type lubrication system that lubricates each gear and bearing with oil has been adopted. This allows a reduction in the torque used to drive the oil pump. Also, by using an oil catch tank to temporarily collect the oil that has been scooped up, a stable supply of oil is available to lubricate the gear train.


b.

To reduce the losses caused by gear scoop-up, an oil reservoir lock plate has been provided. The oil reservoir lock plate functions as an oil separator, restricting the oil flow in the vicinity of the final driven gear and differential gear unit and reducing the losses caused by oil churning.

X144799C01
2.75,0.167 2.917,0.167 2.917,0.167 3.5,0.75 true 4.667,4.813 5.583,4.479 5.583,4.479 5.75,4.479 true 2.563,0.063 2.875,0.219 0.313,0.156 10 false *1 5.813,4.375 6.125,4.531 0.313,0.156 10 false *2 1.25,0.25 1.583,0.417 0.333,0.167 10 false *a 1.25,3.167 1.583,3.333 0.333,0.167 10 false *b
*1 Oil Catch Tank *2 Oil Reservoir Lock Plate
*a Left Side *b Right Side
V100135

Oil Flow
V100136

Final Driven Gear Rotation Direction