Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM
NM37H0E _55 Steering _097279 POWER ASSIST SYSTEMS _0462241 POWER STEERING SYSTEM CO CONTROL F

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM  CONTROL  POWER STEERING CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function

*: Models with advanced park

Steering Sensor Detects the steering direction and angle of the steering wheel assembly.
Speed Sensor Detects the wheel speed of each of the 4 wheels.
Rack and Pinion Power Steering Gear Assembly Steering Torque Sensor Detects the amount of twist of the torsion bar. Based on the torque applied to the torsion bar, the sensor creates an electrical signal, and sends this signal to the power steering ECU.
Reduction Mechanism Reduces the speed of the power steering motor and transmits the rotation of the power steering motor to the rack shaft.
Power Steering ECU with Motor Assembly Power Steering Motor Generates power assist in accordance with a signal received from the power steering ECU.
Rotation Angle Sensor Sends the rotation angle of the power steering motor to the power steering ECU.
Power Steering ECU Operates the power steering motor to provide power assist based on the signals received from various sensors and ECUs.
EV Control ECU
·

Sends the EV battery condition and motive force signals to the power steering ECU.

·

Sends the drive mode select signal to the power steering ECU.


Brake Actuator Assembly No. 2 Skid Control ECU
·

Outputs the vehicle speed signal.

·

Requests steering torque assist during cooperative control.


Air Conditioning Amplifier Assembly Receives a signal from the power steering ECU to limit electrical usage.
Forward Recognition Camera Sends steering assistance request signals to the power steering ECU.
Combination Meter Assembly Power Steering Warning Light (Red Indicator) Illuminates to alert the driver when the power steering ECU detects a malfunction in the EPS system which results in a loss of steering assist torque.
Power Steering Warning Light (Yellow Indicator) Illuminates to alert the driver when the power steering ECU detects a malfunction in the EPS system which limits the steering assist torque.
Multi-information Display Displays a warning message to inform the driver of a malfunction in the EPS system.
Buzzer Sounds to warn the driver of a malfunction in the EPS system.
Clearance Warning ECU Assembly* Sends steering assistance request signals to the power steering ECU.


SYSTEM CONTROL


a.

The power steering ECU calculates the steering assist force based on steering torque information from the steering torque sensor, vehicle speed information from the No. 2 skid control ECU and information from each ECU and controls the power steering motor to generate the required steering assist torque.


b.

The EPS system consists of the control functions listed below:

Control Outline
Steering Assist Control Basic Control Calculates the assist current required based on the steering torque value and the vehicle speed and operates the power steering motor.
Compensation Control Compensates with a force, according to the driver's steering maneuver, improving the comfort of steering.
Sport Mode Control When drive mode Sport is selected, the power steering ECU switches to assist characteristics with higher steering responsiveness than Normal mode to achieve a more direct steering feeling.
Brake Control System Cooperative Control Receives requests from the No. 2 Skid Control ECU assembly and performs steering assist control in accordance with the operating condition of the brake control system. This facilitates the steering operation of the driver, achieving a high level of vehicle stability.
Driving Assistance System Request Control The power steering ECU operates the steering wheel and provides steering assistance using various driving assistance systems. For details, see each driving assistance system section.
Power Supply Voltage Drop Control When the power steering ECU detects a power supply voltage drop, it sends a load control demand to the air conditioning amplifier assembly in order to limit electrical usage.



FAIL-SAFE


a.

If the power steering ECU detects a malfunction in the EPS system, the power steering ECU illuminates the power steering warning light (red indicator*1 and yellow indicator*2) and displays the warning message on the multi-information display, and sounds the buzzer to alert the driver of the malfunction.

HINT:

*1: Illuminates when a malfunction which results in a loss of steering assist torque.

*2: Illuminates when a malfunction which limits the steering assist torque.



b.

If a system malfunction occurs, the power steering ECU changes the control mode to fail-safe mode. For details, refer to the Repair Manual.



DIAGNOSIS


a.

The power steering ECU will also store a Diagnostic Trouble Code (DTC). The DTC can be accessed through the use of the Global TechStream (GTS). For details, refer to the Repair Manual.