CONSTRUCTION
Models with Power Tilt and Power Telescopic Steering Column
A tube type energy absorbing mechanism, which has a retracting double-channel tube, is used.
The No. 2 steering intermediate shaft assembly retracts to absorb the impact from the rack and pinion power steering gear assembly (primary collision).
| *1 | No. 2 steering Intermediate Shaft Assembly | - | - |
| *a | Before Collision | *b | After Collison |
The impact from the steering wheel assembly (secondary collision) is absorbed by the retraction of the double-channel structure tube of the steering column assembly The tube area of the steering column assembly disengages during a collision, the column tube retracts and the steering wheel assembly moves towards the front of the vehicle. Also, the load during disengagement is optimally controlled due to the friction force of the tolerance ring.
| *1 | Steering Column Assembly | *2 | Column Tube |
| *3 | Tolerance Ring | - | - |
| *a | Before Collision | *b | After Collision |
| *c | Column Tube Cross Section | *d | Sliding Stroke |
Models with Manual Tilt and Manual Telescopic Steering Column
The No. 2 steering intermediate shaft assembly contracts during a primary collision (vehicle to another object) to reduce the possibility of the steering column assembly and the steering wheel assembly protruding further into the cabin.
| *1 | No. 2 steering Intermediate Shaft Assembly | - | - |
| *a | Before Collision | *b | After Collison |
The steering column assembly contracts during a secondary collision (driver and vehicle) in order to absorb impact. The breakaway pin on the lower housing shears and disengages the telescopic lock hook to move the steering wheel assembly toward the front of the vehicle. As the steering column assembly contracts, the column tube slides on the inner surface of the lower housing, generating friction and absorbing the energy of the collision.
| *1 | Column Tube | *2 | Breakaway Pin |
| *3 | Lower Housing | *4 | Telescopic Lock Hook |
| *a | Before Collision | *b | After Collision |
| *c | Column Tube Cross Section | *d | Sliding Stroke |
| *e | A-A Cross Section | - | - |