Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › THEFT DETERRENT
NM37H0E _58 Vehicle Interior _097230 THEFT DETERRENT / KEYLESS ENTRY _0455370 THEFT DETERRENT DE DETAILS F

THEFT DETERRENT / KEYLESS ENTRY  THEFT DETERRENT  DETAILS  SECURITY INDICATOR LIGHT  


CONSTRUCTION


a.

An energy-efficient LED is used as a security indicator light, and it is positioned in the multi-display assembly*1 or telltale light assembly*2.


b.

The security indicator light is controlled by the certification ECU and displays the theft deterrent system control status by turning off, illuminating and blinking.

*1: Models with multi-display assembly

*2: Models with radio and display receiver assembly


Models with Multi-display Assembly
Y269881C01
3.417,0.688 4.365,0.688 true 3.25,3.333 2.833,4.5 true 2.729,4.542 3.042,4.698 0.313,0.156 10 false *1 4.438,0.583 4.75,0.74 0.313,0.156 10 false *a
*1 Multi-display Assembly - -
*a Security Indicator Light - -


Models with Radio and Display Receiver Assembly
Y269882C01
3.417,1.135 4.281,0.698 true 4,2.958 4.688,4.469 true 4.635,4.521 4.948,4.677 0.313,0.156 10 false *1 4.354,0.583 4.667,0.74 0.313,0.156 10 false *a
*1 Telltale Light Assembly - -
*a Security Indicator Light - -




OPERATION


a.

When the theft deterrent system or immobiliser system is set, the security indicator light starts blinking at approximately 2-second intervals (approximately 0.125 seconds on/approximately 1.875 seconds off). Furthermore, when the theft deterrent system is in the armed state or alarm sounding state, the security indicator light flashes.:

Security Indicator Light, Theft Deterrent System and Immobiliser System Operation Table
Security Indicator Light Theft Deterrent System Immobiliser System
Off Disarmed State Not Set
Blink Armed State (Flashes according to Immobiliser System Control) Set
Illuminate Armed State/Alarm Sounding State -