Home › General › INTRODUCTION › FEATURES › 2020.11–2021.08
NM37H0E _V1 General _097721 INTRODUCTION _0464433 FEATURES GE GENERAL F

INTRODUCTION  FEATURES  GENERAL  EQUIPMENT  


OUTLINE


a.

Tire Pressure Warning System

i.

The tire pressure warning system is provided.


ii.

The direct-sensing type tire pressure warning system directly detects the tire pressure via tire pressure warning valve and transmitters installed in each disc wheel, and warns the driver about drops in tire pressure by illuminating the tire pressure warning light when the tire pressure drops below the threshold to reduce CO2 emissions and improve safety.



b.

Audio System

i.

The following audio systems are available:

Audio System Audio Head Unit Multi-display Speaker
Multimedia System Radio and Display Receiver Assembly 8-inch 6 Speakers



c.

ASC system

i.

An ASC system is used. A stereo component equalizer assembly generates electrical driving sound based on signals such as the vehicle speed and accelerator pedal depression angle.



d.

Navigation System

i.

The following navigation system are available:

Navigation System Audio Head Unit Multi-display Speaker Navigation ECU

○: Available

Navigation System (JBL Premium Model) Radio Receiver Assembly 12.3-inch 14 Speakers ○



e.

Toyota Multi Operation Touch System

i.

A Toyota multi operation touch system with a 12.3 inch multi-display assembly is adopted.



f.

Telematics System

i.

The telematics system is provided.



g.

TOYOTA Parking Assist-sensor System

i.

The TOYOTA parking assist-sensor system is provided.


ii.

The TOYOTA parking assist-sensor system uses ultrasonic sensors to detect stationary objects in front of, at the corners, at the sides or to the rear of the vehicle.



h.

Parking Support Brake System

i.

The parking support brake system is provided.


ii.

The parking support brake (PKSB) system reduces the risk of damage during accidents by warning the driver, suppressing the drive force and controlling the brakes when there is a possibility of contact with stationary objects, vehicles approaching from the rear or pedestrians behind the vehicle when moving forward or backwards.



i.

Blind Spot Monitor System

i.

The blind spot monitor system is provided.


ii.

The BSM function uses sensors to detect vehicles that are in or rapidly approaching the vehicle's blind spot, helping the driver to confirm safety when changing lanes.



j.

Panoramic View Monitor System

i.

The panoramic view monitor system is provided.


ii.

The panoramic view monitor system displays a panoramic view of the vehicle to assist the driver during parking and low speed driving. The panoramic image is created by seamlessly combining images from each television camera assembly installed to the front, rear, left and right sides of the vehicle.



k.

Power Door Lock Control System

i.

The power door lock control system is provided.



l.

Wireless Door Lock Control System

i.

The wireless door lock control system is provided.



m.

Entry And Start System

i.

The entry and start system is provided.



n.

Theft Deterrent System

i.

The theft deterrent system is provided.


ii.

The theft deterrent system can sound the alarm when somebody attempts to forcibly enter the vehicle, open the engine hood, unlock any door without the electrical key, when a battery terminal is disconnected and reconnected, when objects moving in the cabin are detected or when the vehicle is determined to be sloping.



o.

Illuminated Entry System

i.

The illuminated entry system is provided.


ii.

The illuminated entry system turns the lights on and off in conjunction with the opening and closing or locking and unlocking of the doors, etc., ensuring nighttime usability.



p.

Digital Rear-View Mirror System

i.

The digital rear-view mirror system is provided.


ii.

The digital rear-view mirror system is a driving assist device that displays video from the inner mirror camera assembly on the display in the inner mirror.



q.

Combination Meter Assembly

i.

An 8-inch color TFT type combination meter assembly is used.



r.

Headup Display

i.

A headup display is provided.


ii.

Various types of information that are necessary when driving are shown on the windshield glass. As a result, the driver can confirm information with less eye movement than when looking at the combination meter.



s.

Supplemental Restraint System

i.

The Supplemental Restraint System (SRS) driver and front passenger airbags supplement the seat belts to help reduce shock to the head and chest of the driver and front passenger in the event of a frontal collision.


ii.

The SRS driver knee airbag supplement the seat belts to help restrain the occupant's lower body (mainly knees) of the driver in the event of a frontal collision, enhancing the effectiveness of occupant protection.


iii.

The SRS driver and front passenger side airbags are used to help reduce shock to the chest of the driver and front passenger in the event of a side or rear side collision.


iv.

The SRS curtain shield airbag assemblies are used to help reduce shock to the head of the driver, front passenger and rear passengers in the event of a frontal, side or rear side collision.



t.

Pop Up Hood System

i.

The pop up hood system is provided.


ii.

The pop up hood system operates when a pedestrian collides with the vehicle to reduce the impact to the head by raising the entire engine hood to ensure space in the fuel cell unit compartment.



u.

Power Seat Control System

i.

A power seat control system is provided for the driver seat and front passenger seat.


ii.

A memory function is used in the power seat control system for the driver seat.


iii.

A power easy access system is used in the driver seat.



v.

Seat Heater System

i.

A seat heater is provided in the driver seat, front passenger seat and rear seat.



w.

Climate Control Seat System

i.

A climate control seat system is provided for the driver seat, front passenger seat and rear seat.



x.

Seat Variation

i.

An 8 way power seat is provided for the driver seat.


ii.

A 4 way power seat is provided for the passenger seat.


iii.

A fixed seat is provided for the rear seat.


iv.

A Child Restraint System (CRS) has been provided on the rear seat.



y.

Luggage Compartment Door Opener System

i.

The luggage compartment door opener system is provided.



z.

Fuel Lid Opener System

i.

The fuel lid opener system is provided.



aa.

Air Conditioning System

i.

The automatic air conditioning system uses left and right independent temperature control or multi-zone (3-ZONE) climate control and neural network control is provided.



ab.

Wireless Charging System

i.

A wireless charging system is provided on the console box according to the vehicle specification.



ac.

Power Outlet Socket System

i.

A DC 5 V USB socket has been provided in the console and on the back side of the console box.


ii.

A DC 12 V power outlet socket has been provided in the console box.



ad.

Rear Window Defogger System

i.

The rear window defogger system uses the heater wires on the back window glass to defog the back window glass.



ae.

Windshield Deicer System

i.

The windshield deicer system uses a heater element in the windshield glass to help reduce the formation of ice where the front wipers park.



af.

Mirror System

i.

The following functions are provided for the electrical remote control type outer rear view mirror assembly:

·

Mirror Heater Function

·

Electrical Remote Control

·

Manually-retractable Function

·

Automatically-retractable Function

·

Reverse-linked Mirror

·

Memory System

·

Outside Footwell Light Function




ag.

Front Wiper System

i.

A wiper system with a rain sensing function (with the direct spray function) is used. This system automatically operates the wipers when rain is detected. Additionally, a washer-linked drip-prevention function is provided. When the washer is operated, the wipers also operate.


ii.

A wiper system with a vehicle-speed sensing, adjustable interval function (with the direct spray function) is used. This system automatically changes the intervals of the wiper operation according to the vehicle speed and the intermittent interval adjustment switch. When the washer is operated, the wipers also operate.


iii.

A direct spray arm, in which the washer nozzle is built into the wiper arm, is used to spray washer fluid in the same direction as the movement of the blade, allowing for easier spreading of washer fluid.


iv.

A graphite coating is applied to the surface of the wiper rubber, reducing inversion noise and wiper flutter while the wipers are operating.



ah.

Camera Cleaner System

i.

A camera cleaner system is used.


ii.

The camera cleaner system uses a nozzle installed on top of the television & rear inner view mirror camera assembly to spray washer fluid onto the surface of the camera lens, cleaning off foreign matter that is attached to it (such as water, mud, snow and snow-melting agents) and improving the visibility of the camera image.



ai.

Daytime Running Light System

i.

The daytime running light system is designed to automatically illuminate the Light Emitting Diode (LED) lights during the daytime to keep the vehicle highly visible to other vehicles.



aj.

Light Auto Turn-off System

i.

The light auto turn-off system is used to prevent the driver from leaving the vehicle with the headlights, clearance lights, taillights or license plate lights on.



ak.

Automatic Headlight Beam Level Control System

i.

Dynamic Control Type

·

When the fuel cell system and headlights are on, the automatic headlight beam level control system operates the headlight leveling motors in accordance with the movement of the vehicle.



ii.

Static Control Type

·

When the vehicle is stopped with the fuel cell system and headlights on, the automatic headlight beam level control system operates the headlight leveling motors in accordance with movement of the vehicle.




al.

Automatic Light Control System

i.

When the light control switch is in the AUTO position, the automatic light control sensor detects the ambient light level and automatically turns the headlights, clearance lights, taillights and license plate lights on or off accordingly.



am.

Headlight On/Off Reminder Control system

i.

When the user forgets to turn the headlights on or off, a warning message is displayed on the multi-information display in the combination meter assembly.



an.

Extended Headlight Lighting System

i.

The extended headlight lighting system turns on the headlights (low beams) when the vehicle is parked in order to ensure visibility at night.



ao.

Collision-linked Control System

i.

When a collision occurs in which the SRS airbags are deployed, the turn signal lights are flashed to inform people near the vehicle of its location.



ap.

Lane Change Flasher System

i.

The lane change flasher system flashes the turn signal light a certain number of times when the turn signal switch is moved to the lane change position. By using the lane change flasher system when changing lanes, it is no longer necessary to hold the turn signal switch in the lane change position.



aq.

Acoustic Vehicle Alerting System

i.

A acoustic vehicle alerting system is used.


ii.

When the vehicle is being driven at low speed, the acoustic vehicle alerting system outputs a warning sound from the vehicle approaching speaker assembly to inform pedestrians, cyclists etc., of the approach of the vehicle.



ar.

Toyota Safety Sense

i.

Toyota Safety Sense consists of the following drive assist systems and contributes to a safe and comfortable driving experience:

Driving assist system
·

PCS (Pre-Collision System)

·

Dynamic radar cruise control

·

LTA (Lane Tracing Assist)

·

RSA (Road Sign Assist)

·

AHB (Automatic High Beam)

·

AHS (Adaptive High beam System)




as.

PCS (Pre-Collision System)

i.

The pre-collision system is provided.


ii.

The pre-collision system helps to lessen the damage sustained in a collision by operating in unison with warning devices and brake systems.



at.

Dynamic Radar Cruise Control System

i.

The dynamic radar cruise control system is provided.


ii.

The dynamic radar cruise control system is designed to help reduce driver fatigue by helping to control the vehicle to a speed chosen by the driver. Once the dynamic radar cruise control system is set to the desired vehicle speed, the EV control ECU automatically regulates the motive force to maintain the set vehicle speed without any accelerator pedal operation.



au.

Lane Tracing Assist System

i.

The lane tracing assist system is provided.


ii.

The Lane Tracing Assist (LTA) system uses a forward recognition camera installed on the top of the windshield glass to recognize lane markers when driving on highways or controlled-access highways marked with lane markers. The LTA system also uses the forward recognition camera, millimeter wave radar sensor assembly and blind spot monitor sensor* to recognize preceding and surrounding vehicles, as well as to provide information to the driver, performing steering assistance according to road or driving conditions.

*: Models with blind spot monitor system




av.

Road Sign Assist System

i.

The Road Sign Assist (RSA) system is used. The system recognizes traffic signs using the forward recognition camera and provides information to the driver via the multi-information display and headup display.



aw.

Adaptive High Beam System (AHS)

i.

The adaptive high beam system is provided.


ii.

By using the camera sensor to detect the lights of preceding and oncoming vehicles and subsequently optimizing the illumination area of the headlights accordingly, visibility is enhanced and the demands on the driver is reduced as they do not need to constantly switch between high beam and low beam.



ax.

Automatic High Beam System

i.

The automatic high beam system is provided.


ii.

The automatic high beam system detects lights in front of the vehicle and automatically changes between high beams and low beams to support the driver during night driving.



ay.

Exterior Colors and Interior Colors

i.

Exterior Color

Color No. Color Name
090 Precious White Pearl
1J6 Precious Silver
1L5 Precious Metal
219 Precious Black
3U5 Emotional Red 2
8S6 Dark Blue Mica
8Y7 Force Blue Multiple Layers


ii.

Interior Color

Color No. Color Name
00 White & Dark Brown (Silver)
01 White & Dark Brown (Copper)
20 Black (Silver)
21 Black (Copper)