Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM
NM37H0E _54 Brake _097284 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0466235 BRAKE CONTROL SYSTEM CO CONTROL F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM  CONTROL  HILL-START ASSIST CONTROL  


SYSTEM CONTROL


a.

When the driver switches from the brake pedal to the accelerator pedal when starting off on a hill, hill-start assist control maintains the brake fluid pressure of all 4 wheels to prevent the vehicle from rolling backward.


b.

When starting off on a hill, hill-start assist control allows the driver to slowly switch from the brake pedal to the accelerator pedal in a relaxed manner without the vehicle rolling backwards. Furthermore, occasions in which the parking brake is required to prevent the vehicle from rolling backward have been minimized.


c.

When starting off on a hill with a slippery road surface, the driver does not need to swiftly depress the accelerator which can lead to unnecessary wheelspin.

X112168C03
0.521,0.24 3.531,2.271 3.01,2.031 3.635,0.24 6.646,2.271 3.01,2.031 0.583,0.25 0.896,0.406 0.313,0.156 10 false *a 3.698,0.281 4.01,0.438 0.313,0.156 10 false *b 2.021,1.917 2.333,2.073 0.313,0.156 10 false *c
*a With Hill-start Assist Control *b Without Hill-start Assist Control
*c Brakes Applied to Prevent Vehicle from Rolling Backwards - -


i.

Hill-start assist control operates when all of the following conditions have been met:

Control Start Conditions
·

The shift position is in any position other than P or N (when taking off or reversing on an uphill slope).

·

The brake pedal is depressed and the vehicle is stopped.

·

The accelerator pedal is not depressed.

·

The parking brake is not applied.




ii.

If any one of the following conditions is met during hill-start assist control operation, hill-start assist control will be canceled.

Control Canceling Conditions
·

The shift position is shifted to P or N.

·

The accelerator pedal is depressed.

·

The parking brake is applied.

·

2 seconds have elapsed since the driver released the brake pedal.