OPERATION
Indicator Display
When the Toyota parking assist-sensor system is off, the Toyota parking assist-sensor system OFF indicator is turned on.
When a malfunction occurs, the Toyota parking assist-sensor system OFF indicator illuminates, the meter buzzer sounds, and warnings are displayed on the multi-information display, in order to inform the driver of a system malfunction.
| *a | Toyota Parking Assist-sensor System OFF Indicator | *b | Multi-information Display |
Toyota Parking Assist-sensor System Detection Display (Models without Advanced Park)
If the front center sensor and rear center sensor detect an stationary object, the detection location and the approximate distance to the stationary object are displayed on the multi-information display at 5 levels (longest range, long-range, medium-range, short-range and shortest range).
If the front corner sensor and rear corner sensor detect an stationary object, the detection location and the approximate distance to the stationary object are displayed on the multi-information display at 4 levels (long-range, medium-range, short-range and shortest range).
Toyota Parking Assist-sensor System Detection Display (Models with Advanced Park)
If the front center sensor and rear center sensor detect an stationary object, the detection location and the approximate distance to the stationary object are displayed on the multi-information display at 5 levels (longest range, long-range, medium-range, short-range and shortest range).
If the front corner sensor and rear corner sensor detect an stationary object, the detection location and the approximate distance to the stationary object are displayed on the multi-information display at 4 levels (long-range, medium-range, short-range and shortest range).
If the front side sensor and rear side sensor detect an stationary object, the detection location and the approximate distance to the stationary object are displayed on the multi-information display at 5 levels (longest range, long-range, medium-range, short-range and shortest range).
Side Area Scan Complete/Incomplete Display (Models with Advanced Park)
Stationary objects in the side area cannot be detected and a warning cannot be provided until the ignition switch is turned to ON, the vehicle is driven several meters, and the side sensors have completed scanning the side areas.* Whether stationary objects in each area can be detected and warnings can be provided is therefore shown by displaying whether scanning is complete or incomplete in each area, until scanning is complete in all areas.
*: The driver will be notified of any stationary objects that have already been scanned, even if scanning has not completed.
Warning Display
When a malfunction occurs in the Toyota parking assist-sensor system or the system cannot be used, a warning is displayed on the multi-information display, a Toyota parking assist-sensor system OFF indicator illuminates and the meter buzzer sounds to inform the driver that the system is unavailable.
| Warning Item | Multi-information Display | Indicator/Meter Buzzer Condition |
|---|---|---|
| Toyota parking assist-sensor system malfunction | Parking Assist Malfunction Visit Your Dealer | ·
Toyota parking assist-sensor system OFF indicator: illuminates ·
Meter buzzer: Sounds |
| Ultrasonic sensor dirty, frozen or open circuit | Clean Parking Assist Sensor | ·
Toyota parking assist-sensor system OFF indicator: illuminates ·
Meter buzzer: Sounds |
| Toyota parking assist-sensor system communication malfunction | Parking Assist Unavailable | ·
Toyota parking assist-sensor system OFF indicator: illuminates ·
Meter buzzer: Sounds |