Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PANORAMIC VIEW MONITOR SYSTEM (w/ Advanced Park)
NM37H0E _56 Audio / Visual / Telematics _097229 PARK ASSIST / MONITORING _0466281 PANORAMIC VIEW MONITOR SYSTEM(w/ Advanced Park) DE DETAILS F

PARK ASSIST / MONITORING  PANORAMIC VIEW MONITOR SYSTEM(w/ Advanced Park)  DETAILS  REAR TELEVISION CAMERA  


CONSTRUCTION


a.

The rear television camera assembly is located in the luggage compartment door.


b.

The rear television camera assembly consists of a screen input component with a wide-angle lens and a video signal output component with a small type color Complementary Metal Oxide Semiconductor (CMOS) camera.


c.

The video screen of the rear television camera assembly reverses the video output from the rear television camera assembly, to match the view as if looking to the rear in the inner rear view mirror assembly. Note that this means that the video is horizontally reversed from what would be actually seen to the rear (objects on the left of the vehicle are on the left side of the screen, while objects on the right side of the vehicle are on the right side of the screen).

Except Models with Inner Mirror Camera Assembly
Y270047

Models with Inner Mirror Camera Assembly
Y270048



OPERATION


a.

The screen signal output component uses Complementary Metal Oxide Semiconductor (CMOS) image elements to convert the image captured by (input into) the lens into an electric signal based on the brightness of the image, then outputs it to the multi-display assembly.


b.

The rear television camera assembly detects pedestrians behind the vehicle, and sends a pedestrian detection signal to the parking assist ECU.