OUTLINE
A roof sunshade system is provided depending on the model.
A roll shade (sunshade trim sub-assembly) is used for the shade to reduce weight and ensure a wide head clearance.
A roof shade switch is provided inside the map light assembly.
Functions such as the one-touch auto open-and-close function and jam protection mechanism (overload reverse/stop operation) are provided to achieve superior usability.
The roof sunshade system is composed of parts such as the sliding roof or removable roof housing sub-assembly, roll shade (sunshade trim sub-assembly) and sliding roof drive gear sub-assembly.
The detection of the position/movement direction of the roll shade (sunshade trim sub-assembly), which is required for the system control, is based on the pulse signals from the electrical sensor (pulse sensor). Note that an initialization operation is required after work such as inspection or service.