CONSTRUCTION
A bus connector (Air Conditioning Harness Assembly) is used in the wire harness connection, which connects the servo motor to the air conditioning amplifier assembly.
The bus connector (Air Conditioning Harness Assembly) has a built-in driver IC with a position detection function that communicates with each servo motor connector and actuates the servo motor. This enables bus communication for the servo motor wire harness with a more lightweight construction and a reduced number of wires.
| *1 | Communication Drive IC | *2 | Printed Board |
| *3 | Wire Harness | *4 | Crimping Terminal |
| *5 | Connector (for No. 1 Cooler Thermistor) | *6 | Smart Connector (for Servo Motor) |
| *7 | Connector (for Air Conditioning amplifire Assembly) | - | - |
| *a | Construction | *b | Image illustration of bus connector. |
| *1 | Communication Drive IC | *2 | Printed Board |
| *3 | Wire Harness | *4 | Crimping Terminal |
| *5 | Connector (for Air Conditioning amplifire Assembly) | *6 | Smart Connector (for Servo Motor) |
| *7 | Connector (for No. 1 Cooler Thermistor) | - | - |
| *a | Construction | *b | Image illustration of bus connector. |