OUTLINE
A left and right independent temperature control automatic air conditioning system or multi-zone (3-zone) climate control automatic air conditioning system is provided depending on the model. Also, S-FLOW control (energy-saving airflow control) is used that performs the optimal air conditioning according to the situation while maintaining comfort when the S-FLOW switch provided on the multi-display assembly (air conditioning operation screen) is operated or a rear door is opened and closed.
During heating, an water heater (electric heater sub-assembly) and "FC heat-linked control" that utilizes the exhaust heat generated during FC system power generation are used to improve heating performance and save energy.
The air conditioning amplifier assembly functions as one of the ECUs that comprise the CAN*1 communication system, and it inputs each sensor and switch signals via a direct line, as well as signals required for air conditioning control from the EV control ECU and other parts via a communication line, in order to perform precise air conditioning control according to the vehicle condition. Also, in the same manner, signals related to the air conditioning are output to other ECUs via CAN*1 communication.
As a means of performing advanced air conditioning control that responds to the senses of the occupants, automatic air conditioning control that utilizes a neural network*2 is used to enable comfortable air conditioning.
In models equipped with integrated air conditioning control, an ALL AUTO switch is placed on the seat/steering climate control screen that is displayed on the multi-display assembly. This switch enables the AUTO setting of the air conditioning system, seat heater system*3, comfortable air seat system*4 and steering wheel heater system*5 all at once.*6
A remote air conditioning system is used in which the heating and cooling of the air conditioning system is operated with a remote operation using a dedicated app on a smartphone. This reduces the discomfort of the vehicle interior environment (hot or cold) when entering the vehicle.
When the remote air conditioning system is started with a remote operation from a smartphone, the registers and the set temperature can be set.
*1: CAN, an abbreviation of "Controller Area Network", is an ISO (International Organization for Standardization)-compliant serial communication.
*2: A neural network is a system engineered to process information in a similar manner to the nervous system of living organisms. Complex control can be performed by linking complicated input and output relationships to each other in sophisticated ways, similar to the human brain.
*3: Models with seat heater system
*4: Models with comfortable air seat system
*5: Models with steering heater system
*6: Models with multi-display assembly
SPECIFICATIONS
Air Conditioning System
| Component | Specifications | |
|---|---|---|
|
*1: Upper side *2: Lower side *3: Models using HFO-1234yf (R1234yf) refrigerant *4: Models using HFC-134a (R134a) refrigerant |
||
| Heater Radiator Unit Sub-assembly | Type | Straight Flow Aluminum-II (SFA-II) |
| Size (W x H x L) | 284.7 mm x 120 mm x 27 mm
(11.2 in. x 4.72 in. x 1.06 in.) |
|
| Fin Pitch | 1.5 mm (0.0591 in.) | |
| Blower Motor with Fan Sub-assembly | Motor Type | DC Ferrite Brushless |
| Fan Type | Sirocco | |
| Fan Size (Dia. x H) | 137 mm x 52 mm (5.39 in. x 2.05 in.)*1
140 mm x 35 mm (5.51 in. x 1.38 in.)*2 |
|
| Cooler Condenser Assembly | Type | Global Inner-fin Condenser (GIC) |
| Size (W x H x L) | 680 mm x 414.6 mm x 11.5 mm
(26.8 in. x 16.3 in. x 0.453 in.) |
|
| Fin Pitch | 3.4 mm (0.134 in.) | |
| Compressor with Motor Assembly | Type | ESB27 |
| Refrigerant | Type | HFO-1234yf (R-1234yf)*3
HFC-134a (R-134a)*4 |
| No. 1 Cooler Evaporator Sub-assembly | Type | Ejector Cycle System (ECS) |
| Size (W x H x L) | 306.5 mm x 191 mm x 38 mm
(12.1 in. x 7.52 in. x 1.50 in.) |
|
| Fin Pitch | 3.0 mm (0.118 in.) | |
MAIN FEATURES
The air conditioning system has the following features:
| Feature | Outline |
|---|---|
| High Performance | ·
Neural network control is used, so passengers can finely control the air conditioning for maximum comfort. ·
The rear outlets are installed on the back of the center console and floor to ensure comfortable air conditioning performance for the rear passengers. ·
Pollen removal mode control is used to remove pollen in the area around the upper part of the bodies of the driver and front passenger. ·
The blower control has 7 levels in manual mode and 31 levels in auto mode for more precise control. |
| Light Weight | ·
A bus connector with a built-in IC is used in a lightweight wire harness design to allow a reduced number of wires. ·
The use of this connector means that pulse pattern type servo motors can be used. |
| Compact | A blower motor with a built-in blower motor controller is used to achieve a compact construction for the front air conditioning system. |
| Others | The following parts are used to ensure high cooling performance while achieving a compact and lightweight construction:
·
Semi-center Location Air Conditioning Unit ·
ESB27 Type Compressor ·
Ejector Cycle System (ECS) Evaporator ·
Straight Flow Aluminum-II (SFA-II) Heater Radiator Sub-assembly ·
Global Inner-fin Condenser (GIC) |
PRECAUTION
Precaution for Refrigerant HFO-1234yf (R1234yf)*
*: Models using HFO-1234yf (R1234yf) refrigerant
Compatibility
The parts used in the refrigerant cycle, the compressor oil, etc. of the HFO-1234yf (R1234yf) system are not compatible with the conventional HFC-134a (R134a) system.
Always use HFO-1234yf (R1234yf) as the refrigerant.
Do not charge the system with refrigerant near open flames, as HFO-1234yf (R1234yf) is combustible.
When charging the system with refrigerant, make sure the area is well ventilated (especially be careful in areas where the gas can easily accumulate such as under lifts and in garage pits, as the gas is heavier than air).
Follow any local regulations regarding combustible gases.
Be sure to use a refrigerant recovery unit that is compatible with HFO-1234yf (R1234yf) systems.
High pressure gas is used for the air conditioning system. Be sure to follow the procedure described in the repair manual.
The shape of the service port for refrigerant charging has an exclusive design conforming to international standards for HFO-1234yf (R1234yf) to prevent improper refrigerant charging.
Compressor Oil
Always use ND-OIL 11 as the compressor oil.
When parts of the air conditioning system are removed, quickly block off any areas that are exposed to the outside air with plugs, vinyl tape, etc., as the oil used for HFO-1234yf (R1234yf) systems absorbs moisture easily.
Do not allow the compressor oil to spray, as the oil used for HFO-1234yf (R1234yf) systems has harmful effects on acrylic resins.
Remote Air Conditioning System
Do not use the remote air conditioning system when people are in the vehicle. If operation of the system is automatically suspended, the cabin temperature may become very hot or very cold.
The remote air conditioning system may not operate in the following situations.
When the fuel level is low
When the ambient temperature is extremely low
When the FC system is operating
When the remote air conditioning system is operating in defrost mode, because the performance of air conditioning system is restricted more than when operating in normal defrost mode, the windshield glass may remain foggy. Also, depending on the set temperature and temperature outside the vehicle, the exterior of the windshield glass may become foggy.
When the remote air conditioning system is operating in defrost mode and has just started operating, the effect of the heating may be limited due to the time required before heating begins.