Home › Vehicle Interior › METER / GAUGE / DISPLAY › HEADUP DISPLAY SYSTEM
NM37H0E _58 Vehicle Interior _097852 METER / GAUGE / DISPLAY _0466365 HEADUP DISPLAY SYSTEM CO CONTROL F

METER / GAUGE / DISPLAY  HEADUP DISPLAY SYSTEM  CONTROL  HEADUP DISPLAY CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function

*: Models with navigation system

Headup Display (Meter Mirror Sub-assembly)
·

Meter Mirror ECU


Receives signals from ECUs and switches and projects vehicle information onto the windshield glass.
Combination Meter Assembly
·

Sends information display and master warning display request signals to the headup display.

·

Sends each type of setting signal to the headup display.


Forward Recognition Camera Sends warning display and information display request signals from the Pre-Collision System (PCS), Lane Tracing Assist (LTA) system and Road Sign Assist (RSA) system to the headup display.
Millimeter Wave Radar Sensor Assembly Radiates millimeter radar waves forward, uses the reflected waves to detect the presence of a vehicle ahead, the vehicle-to-vehicle distance and the relative speed and direction of the vehicle ahead, and then transmits this information to the forward recognition camera.
EV Control ECU Sends shift position signals to the headup display.
Steering Pad Switch Assembly Sends switch signals to the combination meter assembly.
No. 2 Skid Control ECU Sends vehicle speed signals to the headup display.
Radio Receiver Assembly
·

Sends the audio operation feedback display and telephone popup display request signals to the headup display.

·

Reroutes signals received from the navigation ECU to the headup display.


Navigation ECU Sends the navigation system-linked display* and compass display request signals to the radio receiver assembly.
Main Body ECU (Multiplex Network Body ECU) Sends the taillight on signal to the headup display.
Clearance Warning ECU Assembly Sends clearance sonar detection request signals and warning display and information display request signals from the ParKing Support Brake (PKSB) system to the headup display.
Air Conditioning Amplifier Assembly Sends ambient temperature signals to the combination meter assembly.
Central Gateway ECU (Network Gateway ECU) Relays the signal between the CAN communication lines.
DLC3 The Techstream can be connected to read the Diagnostic Trouble Codes (DTCs) of malfunctions.


SYSTEM CONTROL


a.

When the meter mirror ECU inputs HUD main switch operation signals, it operates the display on the windshield glass.


b.

The combination meter assembly sends each signal to the meter mirror ECU. Also, when audio-related operations are performed, the radio receiver assembly sends the current condition to the meter mirror ECU. The meter mirror ECU projects each image onto the windshield glass according to received signals.


c.

The meter mirror ECU switches the brightness of the light source used for backlight illumination according to the status of the built-in brightness control sensor and headlight on/off signals.



FUNCTION


a.

Display Function

i.

When the HUD main switch is turned on after the engine switch is turned on (IG), this function operates the display on the windshield glass.


ii.

If the engine switch is turned off while the headup display is displayed, when the engine switch is turned back on (IG), the display function resumes operation in the same condition it was in before the engine switch was turned off.


iii.

The display position of the headup display is memorized in the electrical key or card key carried by the driver when the engine switch is turned off. When the engine switch is turned back on (IG), the headup display position is restored.



b.

Automatic Brightness Adjustment Function

i.

The brightness of the headup display automatically switches to a brightness appropriate for any situation (such as when the display brightness is adjusted by operating the brightness adjustment switch) according to the surrounding brightness detected by the built-in brightness control sensor.


ii.

When the surrounding brightness is darker than 70 lx (dusk), dimmer control changes depending on whether the headlights are on or off.

Y220643E02
2.5,0.333 2.75,0.333 2.75,0.333 3.25,2.333 true 2.167,1.083 2.667,1.417 0.5,0.333 10 false 100000 2.25,1.5 2.667,1.833 0.417,0.333 10 false 10000 2.333,2 2.667,2.333 0.333,0.333 10 false 1000 2.417,2.5 2.667,2.833 0.25,0.333 10 false 100 2.5,3 2.667,3.333 0.167,0.333 10 false 10 2.583,3.417 2.75,3.75 0.167,0.333 10 false 1 2.75,3.583 2.917,3.917 0.167,0.333 10 false 1 3.333,3.583 3.5,3.917 0.167,0.333 10 false 10 3.75,3.583 3.917,3.917 0.167,0.333 10 false 70 4.583,3.583 4.917,3.917 0.333,0.333 10 false 1000 5.25,3.583 5.667,3.917 0.417,0.333 10 false 10000 6.083,1.167 7.083,1.5 1,0.333 10 false Max Brightness 3.583,0.75 5.167,1.083 1.583,0.333 10 false Automatic Dimmer Table 0.333,2.25 2.417,2.583 2.083,0.333 10 false HUD Display Brightness (cd/m2) 0.25,0.25 2.5,0.917 2.25,0.667 10 false Dimmer Control Changes Depending on whether Headlights are On or Off 0.167,4.438 5.083,4.75 4.917,0.313 10 false *: HUD display brightness adjustment width by operating brightness adjustment 4.083,3.583 4.333,3.917 0.25,0.333 10 false 100 5.917,3.583 6.417,3.917 0.5,0.333 10 false 100000 1.75,3.25 2.75,3.583 1,0.333 10 false Min Brightness 2.667,4 6.25,4.333 3.583,0.333 10 false Surrounding Brightness (Natural Light/Instrument Panel) lx



c.

Manual Brightness Adjustment Function

i.

The brightness of the headup display can be adjusted by operating the combination meter assembly display with the steering pad switches.

Brightness Adjustment Specification
Item Specification
Dimming amount per step 12.5% ←→ 17.6% ←→ 25% ←→ 35.3% ←→ 50% ←→ 70.5% ←→ 100% ←→ 141% ←→ 200% ←→ 282% ←→ 400%
Operation method On for less than 0.5 seconds When pressed 1 time, dims up/down 1 step.
On for 0.5 seconds or more When pressed and held, dims up/down 1 step every 0.24 seconds.

Y268473E01
0.417,3.417 2.167,4.083 1.75,0.667 10 false Headup Display Brightness Adjustment Display 2.5,0.448 2.917,0.781 0.417,0.333 10 false 400% 2.5,0.792 2.917,1.125 0.417,0.333 10 false 282% 2.5,1.135 2.917,1.469 0.417,0.333 10 false 200% 2.5,1.479 2.917,1.813 0.417,0.333 10 false 141% 2.5,2.167 2.917,2.5 0.417,0.333 10 false 70.5% 2.615,2.51 3.031,2.844 0.417,0.333 10 false 50% 2.5,2.854 2.917,3.188 0.417,0.333 10 false 35.3% 2.615,3.198 3.031,3.531 0.417,0.333 10 false 25% 2.5,3.542 2.917,3.875 0.417,0.333 10 false 17.6% 2.5,3.885 2.917,4.219 0.417,0.333 10 false 12.5% 3.667,4.417 6.25,4.75 2.583,0.333 10 false Brightness Adjustment Display Operation 2.5,1.823 2.917,2.156 0.417,0.333 10 false 100%



d.

Display Position Adjustment Function

i.

The position of the headup display can be vertically adjusted by operating the combination meter assembly display with the steering pad switches.



e.

Displayed Item Customization Function

i.

The following displayed items can be selected by changing the setting of the combination meter assembly.

·

FC System Indicator (ON/OFF)

·

Navigation (ON/OFF)*

·

Driving Support (ON/OFF)

·

Compass (ON/OFF)

·

Audio (ON/OFF)

·

HUD Rotation (Counterclockwise/Clockwise)

*: Models with navigation system