Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID BATTERY SYSTEM
NM37H0E _51 Engine / Hybrid System _097147 HYBRID / BATTERY CONTROL _0466532 HYBRID BATTERY SYSTEM GE GENERAL F

HYBRID / BATTERY CONTROL  HYBRID BATTERY SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A small, lightweight and highly efficient lithium-ion battery is used.


b.

The EV supply battery assembly has high power density, light weight and long life characteristics, compensates the vehicle drive energy and stores regenerative energy.


c.

The EV supply battery assembly is positioned behind the rear seats and optimally placed in the luggage compartment.


d.

The battery ECU assembly and battery voltage sensors (upper and lower) are optimally positioned to achieve a small EV supply battery assembly.


e.

Due to a battery voltage sensor and battery ECU assembly that monitors the EV supply battery assembly condition (battery voltage, battery current value, temperature) and controls the charging and discharging amount to maintain a certain charging condition, charging from external sources is generally not necessary.


f.

An air cooling type system via the battery cooling blower assembly is used and the intake air ducts and coolant ducts, etc., have been optimized in the EV battery cooling system to achieve enhanced cooling performance and noise reduction.


g.

An aluminum frame is used for the battery pack case to achieve a small shape and protect it from collisions.



SPECIFICATION


EV Supply Battery Assembly
Type Lithium-ion Battery
Cell Quantity 84 Cells (42 Cells x 2 Stacks)
Nominal Voltage 310.8 V (3.7 V x 84 Cells)
Battery Capacity 4.0 Ah

Battery Cooling Blower Assembly
Motor Type Brushless
Fan Type Sirocco Fan
Air Flow Volume 129 m3/h