CONSTRUCTION
The EV supply battery assembly is composed of the No. 1 EV supply stack sub-assembly, No. 2 EV supply stack sub-assembly, battery ECU assembly, battery voltage sensor (upper and lower), battery cooling blower assembly, No. 1 EV battery junction block assembly (System Main Relays (SMRs), EV battery current sensor and precharge resistor) and service plug grip.
| *1 | EV Battery Temperature Sensor | *2 | Battery Voltage Sensor |
| *3 | No. 1 EV Battery Junction Block Assembly
·
System Main Relays (SMRs) ·
EV Battery Current Sensor ·
Precharge Resistor |
*4 | Service Plug Grip |
| *5 | Battery Cooling Blower Assembly | *6 | No. 2 EV Supply Stack Sub-assembly |
| *7 | No. 1 EV Supply Stack Sub-assembly | *8 | Battery ECU Assembly |
Compact, lightweight 3.7 V lithium-ion battery cells are used in order to generate high power output.
| *1 | Positive Terminal | *2 | Negative Terminal |
The 42 lithium-ion battery cells provided for each EV battery stack are connected in series in a bus bar module.
The EV supply battery assembly consists of 2 EV battery stacks. They are connected to each other in series through bus bar modules and wiring harness.
A dedicated battery cooling blower assembly is provided for the EV supply battery assembly.
A service plug grip is provided to shut off the high-voltage circuit, ensuring safety during maintenance work.