OUTLINE
The FC system is centered around the FC stack, and control of each system is performed based on driving (electricity supplying) conditions, external temperature conditions, etc., the [Hydrogen Supply/Circulation System] supplies hydrogen fuel, the [Air Supply System] supplies air, the [FC Cooling System] cools the FC stack assembly, and the [Exhaust System] that removes the water (water vapor) produced during the electricity-generating chemical reaction.
| *1 | FC Radiator Assembly | *2 | FC Cooling Water Temperature Control Valve |
| *3 | Air Conditioning System | *4 | FC Cooling Water Pump Assembly |
| *5 | Mass Air Flow Meter Sub-assembly | *6 | FC Air Compressor with Motor Assembly |
| *7 | Intercooler with Sensor Assembly | *8 | FC Air By-pass Valve Assembly |
| *9 | Air Sealing Valve (FC Air Pressure Regulator Assembly) | *10 | Air Pressure Regulating Valve (FC Air Pressure Regulator Assembly) |
| *11 | Silencer | *12 | Gas-liquid Separator |
| *13 | Exhaust and Drain Valve | *14 | No. 1 Hydrogen Tank Assembly |
| *15 | No. 2 Hydrogen Tank Assembly | *16 | No. 3 Hydrogen Tank Assembly |
| *17 | Tank Shut Valve | *18 | Hydrogen Supply Regulator |
| *19 | Fuel Injector Assembly | *20 | Hydrogen Recirculation Pump Assembly |
| *21 | FC Stack Assembly | - | - |
| *a | FC Cooling System | *b | Air Supply System |
| *c | Exhaust System | *d | Hydrogen Supply/Circulation System |
The FC stack assembly optimally controls the amount of hydrogen fuel supplied by the EV control ECU to the FC stack assembly as well as the intake air volume and FC stack coolant temperature, in order to generate electrical energy according to requests from the EV control ECU.