CONSTRUCTION
"IGNITION ON" or "ACCESSORY" is displayed on the combination meter assembly according to the current power source change condition. In addition, when the fuel cell system can be started, "Key Certification Indicator" is displayed on the multi-information display. As a result, the user can check the current power source change condition and fuel cell system startability condition.
When a malfunction occurs in the entry and start system, a message is displayed on the multi-information display in the combination meter assembly to inform the driver of an entry and start system malfunction. In addition, the message and the multi buzzer sounds.
| *a | Power Source Mode Condition Displayed | *b | Multi-information Display |
| Displayed Item | Power Source Condition |
|---|---|
| Off | Either of the following conditions is met:
·
The fuel cell system has started. ·
The power source is turned off.*1 |
| ACCESSORY | On (ACC) state |
| IGNITION ON | On (IG) state (the fuel cell system is not started.) |
| Key Certification Indicator | Fuel cell system start ready state*2 |
*1: Excludes the fuel cell system start possible condition.
*2: The shift position is in P, the key certification result is OK and the brake pedal is depressed (the stop light switch assembly is on).