CONSTRUCTION
The shift control supply consists of an electric double-layer capacitor, backup relay and P CON MTR 2 relay.
30 seconds after the ignition switch is turned off, the protection relay inside the shift control supply opens and the voltage between the positive (+) and negative (-) terminals of the sub-battery decreases to 0 V.
| *1 | Shift Control Supply
·
Sub-battery ECU ·
DC-DC Converter ·
Electric Double-layer Capacitor ·
Backup Relay ·
P CON MTR 2 Relay |
- | - |
SPECIFICATION
| Type | Electric Double-Layer Capacitor |
| Backup Output Voltage | 8.1 V (8 Capacitors) |