CONSTRUCTION
The hydrogen supply unit is composed of the fuel injector assembly, hydrogen supply primary pipe sub-assembly and hydrogen supply secondary pipe sub-assembly. These components are combined into one unit to save space.
| *1 | Hydrogen Supply Primary Pipe Sub-assembly | *2 | Hydrogen Primary Pressure Sensor |
| *3 | Hydrogen Supply Secondary Pipe Sub-assembly | *4 | Hydrogen Secondary Pressure Sensor |
| *5 | Fuel Injector Assembly | - | - |
|
From Hydrogen Supply Regulator |
|
To FC Stack Assembly |
The injector is controlled by the FC control ECU.
A rubber seal structure is used for the injector valve to support the use of high-pressure hydrogen fuel.
The portion connecting to the primary pipe is provided with an O-ring cylindrical seal, and the portion connecting to the secondary pipe is provided with an insulator.
The O-ring and insulator use a floating construction to suppress the transmission of vibration to surrounding components.
| *1 | Fuel Injector Assembly | - | - |
| *a | Insulator | *b | O-ring |