CONSTRUCTION
To provide the FC stack assembly with the oxygen crucial for generating power using the fuel cell, a high voltage, high flow rate, and high efficiency FC air compressor with motor assembly is installed between the air cleaner with element assembly and FC stack assembly.
The air that passes through the air cleaner with element assembly is compressed by the FC air compressor with motor assembly, cooled by the intercooler, and then sent to the FC stack assembly.
The FC air compressor with motor assembly is controlled by the MG ECU based on the FC air compressor requests received from the EV control ECU.
| Parts | Function |
|---|---|
| FC Air Compressor with Motor Assembly | ·
Supercharges the air that has passed through the air cleaner, and supplies it to the FC stack assembly. ·
An acceleration mechanism composed of a centrifugal compressor and traction drive is used. |
| FC Compressor Motor | ·
Rotates the compressor motor rotor using the high voltage, high current electricity supplied from the inverter with converter assembly. ·
Cooled by water/oil cooling using SLLC from the EV cooling system. |
| Rotation Sensor | ·
Detects the magnet position of the FC compressor motor and sends it to the MG ECU. ·
A resolver-type rotation sensor is used. |
| FC Compressor Motor Temperature Sensor | ·
Detects the temperature of the FC compressor motor stator and sends it to the FC control ECU. |
| *1 | FC Compressor Motor | *2 | Oil Cooler |
|
From Air Cleaner |
|
To Intercooler |