Home › Engine / Hybrid System › INTAKE / EXHAUST › INTAKE SYSTEM
NM37H0E _51 Engine / Hybrid System _097833 INTAKE / EXHAUST _0467491 INTAKE SYSTEM GE GENERAL F

INTAKE / EXHAUST  INTAKE SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

To provide the FC stack assembly with the large amounts of oxygen needed to generate electricity, a high voltage, high flow rate, and compact FC air compressor with motor assembly has been adopted.


b.

To efficiently cool oil, a water-cooled oil cooler is integrated with the FC air compressor with motor assembly.


c.

A large water-cooled intercooler is built separate from the FC air compressor with motor assembly to efficiently cool compressed air.


d.

A design resistant to water and snow entry has been adopted.



MAIN FEATURES


a.

Characteristics of FC Vehicle Intake System

*: Before blockage occurs, the FC system detects a malfunction and displays a message on the multi-information display of the combination meter.

Foreign Matter Management In a FC vehicle, the compressed outside air flows directly into the FC stack. If the air supply contains foreign matter, air passages can be blocked, metal contaminants can adhere to the poles and inhibit electrical generation, etc., so foreign matter management is performed for each component and foreign matter is removed by the air cleaner.
NV Handling When an FC vehicle is compared with a gasoline vehicle, the sources of the FC air compressor operating sounds and airflow sounds from the intake components are the main issues. As a result, the intake system units incorporate acoustic absorption measures such as sound absorbing and silencing materials to counteract the FC air compressor operating sounds and intake component noise, in order to achieve a quiet vehicle that is a selling point of an FC vehicle.
Air Supply Temperature The supplied air is compressed by the FC compressor and supplied into the FC stack. If the temperature of the supplied air is too high, it can exceed the heat resistance temperature of the FC air compressor and cause a malfunction. For this reason and to intake air efficiently from the grill, seals and intake air temperature-based controls are used to avoid intake of hot air from behind the radiator.
Water / Snow Entry If the supplied air is contaminated with water or snow, some of the air passages will become difficult for air to pass, and airflow pressure losses will increase. For this reason, when the actual supplied air volume deviates from the airflow volume estimated based on system control, the proper amount of generated electricity is not reached, and malfunctions such as insufficient speed may occur. Furthermore, blockage can result in air supply (oxygen) not reaching the FC, causing electrical generation to stop.* For this reason, the radiator grill and grill intake cover have been provided with a shape that make it difficult for water to enter.

NOTICE:
·

If the air supplied to the FC stack contains high concentrations of fine dust, sulfurous substances or amine-based substances (thinners, etc.), the electrical generation performance of the FC cell may be reduced, causing a reduction in output.

·

If the intake system is contaminated by salt water, and chlorine components flow into the FC stack, the FC material may experience functional degradation causing a reduction in output.