Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENTRY AND START SYSTEM › from 2021.08
NM37H0E _58 Vehicle Interior _097230 THEFT DETERRENT / KEYLESS ENTRY _0455368 ENTRY AND START SYSTEM GE GENERAL F

THEFT DETERRENT / KEYLESS ENTRY  ENTRY AND START SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The entry and start system has the following main functions, making it a very user-friendly system.

Function Outline
Entry Function Entry Unlock The doors unlock when the outside handle is gripped.
·

The driver door outside handle unlock driver door. (Driver Door Unlock Mode)

·

The driver door outside handle unlocks all doors. (All Door Unlock Mode)

·

The front passenger door outside handle unlocks all doors.

·

The rear door outside handles unlock all doors.*1


Luggage Compartment Door Open The luggage compartment door open function opens the luggage compartment door when the luggage electrical key switch is pressed.
Entry Lock All doors lock when the lock sensor on an outside handle is touched.
Wireless Door Lock Control The wireless door lock control function is a convenient system for locking and unlocking all the doors and opening the power trunk lid at a distance. The basic operation is the same as that in the wireless door lock control system.
Start Function The start function is operated by simply pushing the power switch while carrying the electrical key. When the power switch is pushed, the certification ECU turns the ACC relay, IG1 relay and IG2 relay on or off to switch the power source.*2
·

The power source changes depending on depression of the brake pedal and the shift position.


Immobiliser The immobiliser system compares the ID code that is registered in the certification ECU with the ID code of the transponder chip that is embedded in the electrical key.
Steering Wheel Lock The steering wheel lock function is operated to lock and unlock the steering wheel by using a lock/unlock mechanism in the steering column assembly.

HINT:

*1: Models with rear door entry function

*2: In this chapter, the expression "power source" has been used in some locations to allow precise explanations. The power source condition is also expressed using conventional expressions such as "power switch off", "power switch on (ACC)" and "power switch on (IG)".