Home › Vehicle Interior › INTERIOR PANELS / TRIM › INTERIOR › from 2021.08
NM37H0E _58 Vehicle Interior _097722 INTERIOR PANELS / TRIM _0466355 INTERIOR GE GENERAL F

INTERIOR PANELS / TRIM  INTERIOR  GENERAL  GENERAL  


OUTLINE


a.

Design Concept

i.

SILENT DYNAMISM for Hydrogen Sport

·

A structural design that brings passengers both elation and relaxation by a combination of an innovative "minimalistic expression of function" and "new material feel" that envelopes passengers.




b.

A Never before Type of Cockpit Space

i.

Structural design theme provides passengers with both "concentration" and a sense of "openness"

·

The "enveloping feeling" of the driver side (A in illustration) and the "expansive feel" extending to the front passenger side (B in illustration) are combined in a dynamic structural design theme.

V129522N01
3.375,1.865 3.375,0.281 true 4.781,1.646 4.781,0.396 true 3.333,0.125 3.49,0.323 0.156,0.198 10 false A 4.75,0.229 4.906,0.427 0.156,0.198 10 false B


·

Information functions are consolidated in the large cluster (B in illustration) located above the calming soft pad area that envelopes passengers (A in illustration). The spatial structure was designed to provide an impressive contrast between "concentration" and "relaxation".

V129523N01
5,1.167 5,0.417 true 3.333,1.167 3.333,0.417 true 4.958,0.26 5.073,0.427 0.115,0.167 10 false A 3.292,0.26 3.406,0.427 0.115,0.167 10 false B




c.

Combined Structure with Clear HMI

i.

Large display provides consolidated information

·

The navigation system display and meters are expressed using a continuous panel structure. The structure that continues to the front toward the headup display draws the driver's line of sight to the headup display. This allows the driver to intuitively recognize provided information in the cockpit.

V129524



ii.

Switches are zoned by function with consistent tone and manner

·

Easy to understand: Zoned by function (A in illustration)

·

Easy to operate: Finger-fitting (B in illustration)

·

Simple: Consistent rectangular shape and cross-section (A and B in illustration)

V129525N01
5.01,0.938 5.01,0.354 5.01,0.354 5.094,0.354 true 1.281,0.917 1.281,0.333 1.281,0.333 1.365,0.333 true 5.094,3.938 5.094,4.521 5.094,4.521 5.177,4.521 true 3.094,3.938 3.094,4.521 3.094,4.521 3.177,4.521 true 1.406,2.938 1.406,4.271 1.406,4.271 1.49,4.271 true 1.396,0.25 1.552,0.448 0.156,0.198 10 false B 5.135,0.271 5.292,0.469 0.156,0.198 10 false A 1.531,4.198 1.688,4.396 0.156,0.198 10 false A 3.219,4.438 3.375,4.635 0.156,0.198 10 false A 5.219,4.438 5.375,4.635 0.156,0.198 10 false A




d.

A New Material Feel Expressed

i.

Contrast between "soft material" and "metallic ornamentation"

·

The ends of the soft leather are decorated with high quality metallic ornamentation themed according to the specification, and the contrast between the materials in look and feel creates a modern space.

V129526C01
1.917,3.167 1.5,2.75 1.5,2.75 1.417,2.75 true 2.917,3.75 3.417,3.25 3.417,3.25 3.5,3.25 true 0.938,2.521 1.25,2.75 0.313,0.229 12 false *A: 1.271,2.656 1.583,2.813 0.313,0.156 10 false *a 3.51,3.167 3.823,3.323 0.313,0.156 10 false *b 3.833,2.521 4.146,2.75 0.313,0.229 12 false *B:
*A Satin Silver Specification *B Copper Specification
*a Leather *b Metallic Ornamentation




ii.

Coordinated Surface Treatment

·

Surface punching is used throughout the interior as an accent to provide the structure with a light feel, in a way that takes the speakers and anti-slip functions into account.

V129527C01
0.865,0.677 1.177,0.875 0.313,0.198 10 false *a 3.635,0.677 3.948,0.875 0.313,0.198 10 false *e 0.833,3.188 1.146,3.385 0.313,0.198 10 false *b 0.865,6.906 1.177,7.104 0.313,0.198 10 false *c 3.063,4.906 3.375,5.104 0.313,0.198 10 false *d
*a Instrument Panel Upper Area *b Wireless Charging System Area
*c Door Speaker Area *d Front/Rear Scuff Plate Area
*e Package Tray Area - -






MAIN FEATURES


a.

Instrument Panel

i.

The center register (function area) is located within the ornamentation (instrument cluster finish panel garnish assembly) and the design connects the ornamentation and fin horizontally, for an overall design where ornamentation and function blend together.

V129534C01
4.698,1.385 4.698,0.219 4.698,0.219 4.615,0.219 true 6.104,3.323 6.104,2.573 6.104,2.573 6.021,2.573 true 6.604,3.281 6.604,2.615 6.604,2.615 6.521,2.615 true 4.479,0.146 4.792,0.302 0.313,0.156 10 false *1 6.375,2.531 6.688,2.688 0.313,0.156 10 false *a 5.865,2.51 6.177,2.667 0.313,0.156 10 false *b
*1 Instrument Cluster Finish Panel Garnish Assembly - -
*a Ornamentation *b Fin (Center Register)



ii.

Metallic ornamentation is used in the instrument cluster finish panel garnish assembly and console panel sub-assembly upper rear.


iii.

Seams are eliminated in the ornamentation on the instrument cluster finish panel garnish assembly in order to provide a sleek impression.


iv.

Copper ornamentation indistinguishable from real copper is used for the metallic ornamentation of the copper ornamentation specification.

V129535C01
4.583,2.167 4.583,0.583 4.583,0.583 4.667,0.583 true 2.833,2.833 2.833,0.333 2.833,0.333 2.917,0.333 true 4.708,0.5 5.021,0.656 0.313,0.156 10 false *1 2.948,0.26 3.26,0.417 0.313,0.156 10 false *2
*1 Instrument Cluster Finish Panel Garnish Assembly *2 Console Panel Sub-assembly Upper Rear



v.

The viewing angle from the passenger in the front passenger seat is minimized due to improvements in the overall design of the structures in the instrument panel. The design with the protruding driver seat cluster panel and front passenger seat pad in the horizontal direction creates an expansive interior space.

V129536C01
2.521,5.594 2.833,5.75 0.313,0.156 10 false *a 6.677,3.146 6.99,3.302 0.313,0.156 10 false *b 5.219,3.448 5.531,3.604 0.313,0.156 10 false *c 2.365,0.302 2.677,0.458 0.313,0.156 10 false *d 3.177,0.833 3.49,0.99 0.313,0.156 10 false A 3.188,2.688 3.5,2.844 0.313,0.156 10 false A
*a A - A Cross Section *b Eye Point
*c Instrument Panel Visible Angle *d Design Protruding in the Horizontal Direction



vi.

A wide armrest is used to express a grandness in the interior.


vii.

A long armrest is used to provide superior usability for people of varying sizes.

V129537C01
2.99,1.729 3.302,1.885 0.313,0.156 10 false *a 2.229,1.719 2.542,1.875 0.313,0.156 10 false *b
*a Wide Armrest *b Long Armrest



viii.

A large panel containing a 12.3-inch large display, register and switches is located above the synthetic leather panel and extends from the vehicle center area to the driver seat area, for a design that gives an impression of innovation within luxury. The design also provides a sleek impression around the meters due to its lack of meter cluster parts and its consistent piano black coating.

V129538C01
5.25,2.365 5.25,0.781 5.25,0.781 5.167,0.781 true 4.083,1.417 4.083,0.5 4.083,0.5 4,0.5 true 1.615,1.5 1.615,0.417 1.615,0.417 1.531,0.417 true 3.865,0.417 4.177,0.573 0.313,0.156 10 false *1 1.385,0.333 1.698,0.49 0.313,0.156 10 false *2 5.031,0.698 5.344,0.854 0.313,0.156 10 false *3
*1 12.3-inch Large Display *2 Register
*3 Switches - -



ix.

The display area is designed to provide a sleek impression due to the switches being located on the bottom end of the panel and a thinner back panel.


x.

The meter hood wrapped in synthetic leather is structured to cover the panel (instrument cluster finish panel assembly), while seams are eliminated from the HUD bezel (instrument cluster finish panel end) and back panel, resulting in a consistent upper surface structure.

V129539C01
1.083,1 1.167,1 1.167,1 1.167,1.667 true 1.583,3.083 1.583,4.583 1.583,4.583 1.667,4.583 true 2.229,3.656 2.229,4.656 2.229,4.656 2.313,4.656 true 2.833,1.667 2.833,0.167 2.833,0.167 2.75,0.167 true 6.583,1.917 4.917,1.917 4.917,1.917 4.083,1.25 true 6.667,1.5 6.667,1.583 6.667,1.583 5.083,1.583 true 6.604,1.323 6.917,1.479 0.313,0.156 10 false *1 1.688,4.51 2,4.667 0.313,0.156 10 false *2 2.615,0.094 2.927,0.25 0.313,0.156 10 false *3 0.948,0.917 1.26,1.073 0.313,0.156 10 false *4 2.344,4.573 2.656,4.729 0.313,0.156 10 false *1 6.604,1.833 6.917,1.99 0.313,0.156 10 false *2
*1 Switches *2 Back Panel
*3 Instrument Cluster Finish Pad Assembly *4 Instrument Cluster Finish Panel End



xi.

Synthetic leather is used on highly visible or frequently touched areas such as the instrument cluster finish panel assembly, instrument cluster finish panel ornament and instrument panel safety pad sub-assembly No. 2, resulting in a structure with a soft feel. The same synthetic leather is used on the console box assembly, expressing a luxury feel.


xii.

An invisible type front passenger seat airbag door is used in order to eliminate seams of parts.


xiii.

Synthetic leather is also provided on the panels of the driver seat and front passenger seat (console upper panel garnish No. 1 and console upper panel garnish No. 2) that tend to have contact with passengers' legs or knees, providing quality feel suitable a luxury vehicle.

V129545C01
2.417,0.833 2.417,0.25 2.417,0.25 2.5,0.25 true 4.719,2.167 5.552,2.167 5.552,2.167 5.552,2.083 true 5.917,1.5 5.833,1.5 5.833,1.5 5.167,0.833 true 3.5,3 3.594,3 3.594,3 3.594,2.167 true 1.75,2.667 1.667,2.667 1.667,2.667 1.667,1.833 true 5.75,0.75 5.75,0.167 5.75,0.167 5.833,0.167 true 5.365,4.698 5.281,4.698 5.281,4.698 5.281,3.365 true 2.531,0.167 2.844,0.323 0.313,0.156 10 false *1 5.875,0.094 6.188,0.25 0.313,0.156 10 false *2 5.479,1.917 5.792,2.073 0.313,0.156 10 false *3 5.385,4.625 5.698,4.781 0.313,0.156 10 false *4 3.354,2.927 3.667,3.083 0.313,0.156 10 false *5 1.781,2.594 2.094,2.75 0.313,0.156 10 false *6 5.948,1.417 6.26,1.573 0.313,0.156 10 false *a
*1 Instrument Cluster Finish Pad Assembly *2 Instrument Panel Safety Pad Subassembly No. 2
*3 Console Upper Panel Garnish No. 2 *4 Console Box Assembly
*5 Console Upper Panel Garnish No. 1 *6 Instrument Cluster Finish Panel Ornament
*a Air Bag Door (Front Passenger Seat Side) - -



xiv.

Seams are eliminated from the large panel (instrument panel safety pad sub-assembly No. 2) extending from the front passenger seat to the driver seat, providing a sleek and spacious impression. Additionally, a character line is provided on the design surface, fearing a convex shape and expressing a sharp look.

V129546C01
5.5,2 5.5,0.5 5.5,0.5 5.583,0.5 true 4.25,3.865 4.25,3.281 4.25,3.281 4.333,3.281 true 2.75,3.917 2.75,4.75 2.75,4.75 2.667,4.75 true 5.615,0.427 5.927,0.583 0.313,0.156 10 false *1 4.385,0.896 4.552,1.063 0.167,0.167 10 false A 4.406,5.604 4.719,5.76 0.313,0.156 10 false *a 4.354,3.208 4.667,3.365 0.313,0.156 10 false *b 2.542,4.656 2.854,4.813 0.313,0.156 10 false *c 3.833,2.583 4,2.75 0.167,0.167 10 false A
*1 Instrument Panel Safety Pad Subassembly No. 2 - -
*a A - A Cross Section *b Character Line
*c Convex Shape - -



xv.

The entire surface of the front passenger side upper surface panel (instrument panel speaker panel No. 1) has the look of punched metal, while the functional design of the speaker area found in the standard design is no longer used and seams are eliminated from between parts, providing a sleek and spacious feel.

V129547C01
6.302,1.802 6.302,0.802 6.302,0.802 6.219,0.802 true 5.042,1.5 5.042,0.5 5.042,0.5 4.958,0.5 true 3.865,0.635 3.865,0.135 3.865,0.135 3.781,0.135 true 4.813,0.427 5.125,0.583 0.313,0.156 10 false *1 4.677,5.396 4.99,5.552 0.313,0.156 10 false *a 6.073,0.719 6.385,0.875 0.313,0.156 10 false *b 3.635,0.042 3.948,0.198 0.313,0.156 10 false *b
*1 Instrument Panel Speaker Panel No. 1 - -
*a Punched Metal Style Design *b Speaker Area



xvi.

Foam molding is used for the duct base material to achieve weight reduction. Additionally, the foam molding provides the duct base material itself with high thermal insulation performance, reducing heat loss in the cool air from the air conditioning unit, and helping improve both comfort and fuel efficiency.

V129548C01
3.375,1.135 3.375,0.135 3.375,0.135 3.292,0.135 true 2.333,1.594 2.333,0.594 2.333,0.594 2.25,0.594 true 3.146,0.063 3.458,0.219 0.313,0.156 10 false *1 2.104,0.51 2.417,0.667 0.313,0.156 10 false *2 5.688,3.448 6,3.604 0.313,0.156 10 false *a
*1 Duct *2 Air Conditioner Unit Assembly
*a Foam Duct Cross-section - -



xvii.

Foam molding is used instead of conventional solid molding in the instrument side panel No. 1/ No. 2 and console, and in the box side panel No. 1/No. 2 and console box lower, to achieve weight reduction and help reduce fuel consumption.

V129549C01
4.417,4.333 4.5,4.333 4.5,4.333 4.5,3.5 true 1.031,3.802 0.948,3.802 0.948,3.802 0.948,2.969 true 5.167,4.5 5.25,4.5 5.25,4.5 5.25,3.417 true 1.052,3.708 1.365,3.865 0.313,0.156 10 false *1 4.271,4.26 4.583,4.417 0.313,0.156 10 false *2 5.031,4.417 5.344,4.573 0.313,0.156 10 false *3
*1 Instrument Side Panel No. 1
Instrument Side Panel No. 2
*2 Box Side Panel No. 1
Box Side Panel No. 2
*3 Console Box LWR - -




b.

Steering

i.

The black leather wrapping specification is used for the steering wheel assembly regardless of the interior color, for an understated yet high quality design.


ii.

The switch area is given a tactile feel and the switches are placed in a functional manner to allow the switches to be operated without looking at them.

V129550C01
3.833,0.833 3.417,0.417 3.417,0.417 3.333,0.417 true 3.177,0.354 3.49,0.51 0.313,0.156 10 false *1 0.531,0.979 0.844,1.135 0.313,0.156 10 false *a
*1 Steering Wheel Assembly - -
*a Switch Area - -




c.

Door

i.

A design that expresses both enveloping feeling and expansive feel, flowing from the instrument panel is used for the door trim.


ii.

Synthetic leather is used for the door trim upper and door armrest, for a superior appearance and quality feel.

Door Trim (This illustration is an example only.)
V129552C01
2.5,1.25 3.167,0.583 3.167,0.583 3.25,0.583 true 5.417,1.167 6.083,0.5 6.083,0.5 6.167,0.5 true 2.917,2 3.5,2.583 3.5,2.583 3.583,2.583 true 5.75,1.917 6.333,2.5 6.333,2.5 6.417,2.5 true 1.802,2.99 2.115,3.146 0.313,0.156 10 false *1 4.927,3 5.24,3.156 0.313,0.156 10 false *2 3.292,0.51 3.604,0.667 0.313,0.156 10 false *a 3.625,2.5 3.938,2.656 0.313,0.156 10 false *b 6.198,0.427 6.51,0.583 0.313,0.156 10 false *a 6.448,2.417 6.76,2.573 0.313,0.156 10 false *b
*1 Front Door Trim Board Sub-assembly *2 Rear Door Trim Board Sub-assembly
*a Door Trim Upper *b Door Armrest



iii.

A padded layer is provided in the door armrest for a comfortable tactile sensation.

Pad Layer(This illustration is an example only.)
V129553C01
5,1.26 5,0.51 5,0.51 4.917,0.51 true 3.188,1.292 3.5,1.448 0.313,0.156 10 false A 5.563,3.5 5.875,3.656 0.313,0.156 10 false *a 4.771,0.448 5.083,0.604 0.313,0.156 10 false *b 3.188,2.146 3.5,2.302 0.313,0.156 10 false A
*a A - A Cross Section *b Pad Layer



iv.

A recessed area is provided in the section of the pull handle area on the door armrest grabbed by the fingers, to provide grabbing comfort (fit).


v.

A generous padded layer is provided in the pull handle area for superior grabbing comfort.


vi.

A sufficient depth is provided for the pull handle so that the fingertips do not make contact with the bottom.

Pull Handle (This illustration is an example only.)
V129554C01
5.469,2.146 5.719,2.396 5.719,2.396 5.802,2.396 true 5.083,1.75 4.75,2.583 4.75,2.583 4.667,2.583 true 5.729,3.625 6.042,3.781 0.313,0.156 10 false *a 5.844,2.323 6.156,2.479 0.313,0.156 10 false *b 4.51,2.51 4.823,2.667 0.313,0.156 10 false *c 4.052,2.063 4.365,2.219 0.313,0.156 10 false *d 2.417,1.563 2.729,1.719 0.313,0.156 10 false A 2.417,2.396 2.729,2.552 0.313,0.156 10 false A
*a A - A Cross Section *b Recessed Area
*c Pad Layer *d Depth



vii.

Copper ornamentation or satin chrome plating are provided as ornamentation for a high quality door trim.

Ornamentation (This illustration is an example only.)
V129555C01
4,0.719 4.313,0.875 0.313,0.156 10 false *a 4.01,1.979 4.323,2.135 0.313,0.156 10 false *b
*a Satin Chrome Plating *b Copper Ornamentation




d.

Scuff Plate

i.

Depending on the specifications, an SUS plate with the vehicle model written on it is provided on the front door scuff plate for an improved appearance.


ii.

The surface of the front door scuff plate is punched to serve as an accent consistent with the interior in order to provide the molding with a light feel.

Scuff Plate (This illustration is an example only.)
V129557C01
3.594,4.427 3.51,4.427 3.51,4.427 3.51,3.844 true 5.25,4.333 5.167,4.333 5.167,4.333 5.167,3.75 true 1.042,3.177 1.354,3.333 0.313,0.156 10 false *1 3.635,4.375 3.948,4.531 0.313,0.156 10 false *2 5.281,4.26 5.594,4.417 0.313,0.156 10 false *a
*1 Front Door Scuff Plate *2 Front Door Scuff Ornament
*a Punched Surface - -




e.

Roof

i.

A rippled shape is used in the roof headlining assembly for the normal roof specification, providing a superior appearance.


ii.

The same upholstery as found on the roof headlining assembly is used on the front pillar garnish assembly and roof side rail garnish assembly. As a result, the design achieves an impressive appearance of the upholstery forming an arch as well as a superior tactile sensation.

Roof (This illustration is an example only.)
V129558C01
3.75,1.417 2.917,0.583 2.917,0.583 2.833,0.583 true 5.75,1.583 5.75,0.75 5.75,0.75 5.833,0.75 true 6,2.75 6,2.333 6,2.333 6.083,2.333 true 1.146,2.927 1.146,2.51 1.146,2.51 1.063,2.51 true 3.5,2.75 3.917,3.167 3.917,3.167 4,3.167 true 0.917,2.458 1.229,2.615 0.313,0.156 10 false *1 5.875,0.688 6.188,0.844 0.313,0.156 10 false *2 6.115,2.281 6.427,2.438 0.313,0.156 10 false *3 2.688,0.51 3,0.667 0.313,0.156 10 false *a 4.031,3.104 4.344,3.26 0.313,0.156 10 false *b
*1 Front Pillar Garnish Assembly *2 Roof Headlining Assembly
*3 Roof Side Rail Garnish Assembly - -
*a Ripple Shape *b Impressive Appearance of an Arch Forming



iii.

An infrared reflection layer is provided in the roof headlining assembly. A film coated with aluminum particles reflects far-infrared rays emitted from the roof panel during the summer and suppresses the temperature increase of the ceiling, reducing the power load (thermal load) of the air conditioning.

Infrared Reflection Layer (This illustration is an example only.)
V129559C01
2.083,3.229 2.167,3.229 2.167,3.229 2.333,3.396 false 2.083,3.469 2.333,3.469 false 2.083,3.833 2.333,3.833 false 2.083,4.333 2.333,4.333 false 4.813,3.5 5.063,3.5 false 4.813,3.917 5.063,3.917 false 4.813,4.333 5.063,4.333 false 2.083,2.948 2.333,2.948 false 4.802,2.969 5.052,2.969 false 5.052,3.229 4.969,3.229 4.969,3.229 4.802,3.396 false 6.188,2 6.104,2 6.104,2 5.688,1.583 false 6.219,1.927 6.531,2.083 0.313,0.156 10 false *1 3.51,3.052 3.823,3.208 0.313,0.156 10 false *a 3.51,4.281 3.823,4.438 0.313,0.156 10 false *b 2.438,3.125 2.75,3.281 0.313,0.156 10 false *c 1.917,2.865 2.229,3.021 0.313,0.156 10 false *d 1.917,3.156 2.229,3.313 0.313,0.156 10 false *e 1.917,3.417 2.229,3.573 0.313,0.156 10 false *f 1.917,3.76 2.229,3.917 0.313,0.156 10 false *g 1.917,4.26 2.229,4.417 0.313,0.156 10 false *h 5.104,3.167 5.417,3.323 0.313,0.156 10 false *i 4.125,3.135 4.438,3.292 0.313,0.156 10 false *c 5.104,2.917 5.417,3.073 0.313,0.156 10 false *d 5.104,3.427 5.417,3.583 0.313,0.156 10 false *f 5.104,3.833 5.417,3.99 0.313,0.156 10 false *g 5.104,4.25 5.417,4.406 0.313,0.156 10 false *h
*1 Roof Headlining Assembly - -
*a Exterior Side *b Interior Side
*c Far-infrared Ray *d Roof Panel
*e Non-woven Fabric *f Airflow Blocking Film
*g Base Material Core *h Skin
*i Infrared Reflection Layer - -




f.

Illumination

i.

Interior illumination is provided throughout the vehicle out of consideration for usability.

V129561C01
2.51,0.885 2.51,0.219 2.51,0.219 2.594,0.219 true 4.5,1.188 4.5,0.271 4.5,0.271 4.583,0.271 true 0.885,1.26 0.885,1.344 0.885,1.344 2.302,1.344 true 2.531,3.063 2.531,2.646 2.531,2.646 2.615,2.646 true 4.177,3.417 4.177,2.583 4.177,2.583 4.26,2.583 true 3.052,3.469 3.052,4.302 3.052,4.302 3.135,4.302 true 2.75,3.542 2.75,4.458 2.75,4.458 2.833,4.458 true 2.688,1.281 2.688,2.115 2.688,2.115 2.771,2.115 true 5.917,5.781 5.917,4.948 5.917,4.948 6,4.948 true 3.75,5.677 3.75,5 3.75,5 3.833,5 true 2.74,5.677 2.74,5 2.74,5 2.823,5 true 2.208,5.688 1.375,4.854 1.375,4.854 1.292,4.854 true 1.906,5.99 1.156,5.24 1.156,5.24 1.073,5.24 true 1.823,6.229 0.573,6.229 0.573,6.229 0.573,6.146 true 1.396,6.844 0.729,7.51 0.729,7.51 0.646,7.51 true 2.375,6.333 2.375,7.583 2.375,7.583 2.292,7.583 true 2.823,7.115 2.823,7.615 2.823,7.615 2.906,7.615 true 2.896,6.344 2.646,6.594 2.646,6.594 2.646,7.677 true 3.563,6.052 3.563,7.719 3.563,7.719 3.646,7.719 true 2.813,6.01 3.229,5.573 3.229,5.573 3.229,4.844 true 2.021,5.76 1.354,5.094 1.354,5.094 1.271,5.094 true 1.188,0.323 1.5,0.563 0.313,0.24 12 false *A: 2.656,2.573 2.969,2.729 0.313,0.156 10 false *1 0.823,1.094 1.135,1.25 0.313,0.156 10 false *2 2.802,2.042 3.115,2.198 0.313,0.156 10 false *3 4.625,0.198 4.938,0.354 0.313,0.156 10 false *4 1.135,4.792 1.448,4.948 0.313,0.156 10 false *5 1.104,5.031 1.417,5.188 0.313,0.156 10 false *6 0.938,5.177 1.25,5.333 0.313,0.156 10 false *7 0.521,6.01 0.833,6.167 0.313,0.156 10 false *8 0.49,7.438 0.802,7.594 0.313,0.156 10 false *9 2.073,7.51 2.542,7.667 0.469,0.156 10 false *10 2.542,7.688 3.01,7.844 0.469,0.156 10 false *11 2.948,7.552 3.417,7.708 0.469,0.156 10 false *12 3.677,7.646 4.146,7.802 0.469,0.156 10 false *13 6.031,4.875 6.5,5.031 0.469,0.156 10 false *14 3.865,4.938 4.333,5.094 0.469,0.156 10 false *15 3.125,4.677 3.594,4.833 0.469,0.156 10 false *16 2.635,0.156 2.948,0.313 0.313,0.156 10 false *1 3.177,4.229 3.49,4.385 0.313,0.156 10 false *2 2.865,4.396 3.177,4.552 0.313,0.156 10 false *3 4.302,2.521 4.615,2.677 0.313,0.156 10 false *4 1.25,2.719 1.563,2.958 0.313,0.24 12 false *B: 2.854,4.938 3.323,5.094 0.469,0.156 10 false *17
*A Models with Normal Roof *B Models with Panorama Roof
*1 Vanity Light (Driver and Front Passenger Side) *2 Shift Illumination Light
*3 Map Light Assembly *4 Spot Light Assembly
*5 Instrument Panel Illumination Light *6 Glove Box Light
*7 Front Foot Light RH *8 Ignition Switch Illumination Light
*9 Front Foot Light LH *10 Cup Holder Illumination Light
*11 Rear Foot Light RH *12 Rear Foot Light LH
*13 Rear Courtesy Light RH *14 Luggage Compartment Light
*15 Ornament Illumination Light (Rear Door) *16 Front Courtesy Light RH
*17 Ornament Illumination Light (Front Door) - -



ii.

Interior illumination is provided to express an interior space that matches the preferences of the customer using multi-colored lighting, depending on the specification. 8 colors may be selected for the interior illumination by operating the center display.

No. Selectable Colors
1 Clear Blue
2 Blue
3 Turquoise
4 Purple
5 Red
6 Orange
7 Green
8 Pink

V129564C01
5.833,1.948 5.833,0.198 5.833,0.198 5.917,0.198 true 3.385,2.135 3.385,0.135 3.385,0.135 3.469,0.135 true 1.26,1.49 1.26,0.156 1.26,0.156 1.344,0.156 true 7,2.333 7,2.417 7,2.417 5.083,2.417 true 1.813,1.01 1.813,0.177 1.813,0.177 1.896,0.177 true 3.5,0.052 3.813,0.208 0.313,0.156 10 false *1 1.917,0.094 2.229,0.25 0.313,0.156 10 false *2 1.375,0.073 1.688,0.229 0.313,0.156 10 false *3 6.917,2.177 7.083,2.333 0.167,0.156 10 false *4 5.969,0.115 6.281,0.271 0.313,0.156 10 false *5 0.906,3.271 1.219,3.427 0.313,0.156 10 false *6
*1 Cup Holder Illumination *2 Inside Handle Illumination
*3 Door Ornament Illumination *4 Footwell Light Illumination
*5 Instrument Panel Illumination *6 Center Display




g.

Storage

i.

A small storage space is provided in the map light assembly and a card holder is provided in the visor assembly in consideration of passenger usability.

V129565C01
3,1.25 3,0.25 3,0.25 3.083,0.25 true 5.083,2 5.083,0.25 5.083,0.25 5.167,0.25 true 2.333,2.167 2.333,3.583 2.333,3.583 2.25,3.583 true 4.5,2.167 4.5,3.583 4.5,3.583 4.583,3.583 true 5.208,0.188 5.438,0.344 0.229,0.156 10 false *2 3.115,0.188 3.344,0.344 0.229,0.156 10 false *1 4.615,3.521 4.844,3.677 0.229,0.156 10 false *b 2.094,3.51 2.323,3.667 0.229,0.156 10 false *a
*1 Map Light Assembly *2 Visor Assembly
*a Storage Space *b Card Holder



ii.

A BIN-type glove box (glove compartment door assembly) is used. A flocking sheet (flocked material) is used inside the glove box to express a sense of luxury.

V129579C01
3.75,2.083 3.75,3.667 3.75,3.667 3.833,3.667 true 3.5,1.667 3.5,0.25 3.5,0.25 3.583,0.25 true 2.333,1.75 2.333,0.333 2.333,0.333 2.417,0.333 true 3.854,3.583 4.167,3.74 0.313,0.156 10 false *1 3.615,0.167 3.927,0.323 0.313,0.156 10 false *a 2.458,0.26 2.771,0.417 0.313,0.156 10 false *a
*1 Glove Compartment Door Assembly - -
*a Flocking Sheet - -



iii.

Space is provided in the console box assembly to store a tissue box or small objects. Additionally, flocked coating is provided inside the box to express a sense of luxury.

V129581C01
4.417,3.083 4.417,3.667 4.417,3.667 4.5,3.667 true 3.417,2.417 3.417,1.583 3.417,1.583 3.5,1.583 true 4.542,3.594 4.854,3.75 0.313,0.156 10 false *1 3.521,1.5 3.833,1.656 0.313,0.156 10 false *a
*1 Console Box Assembly - -
*a Flocked Paint - -



iv.

A cup holder that can store 2 cups side by side is provided in the console panel sub-assembly upper rear. A 2-point type support to prevent the cup from moving is used to enhance appearance and make it easier to remove the cup.

V129583C01
4.333,2.552 5.302,1.156 5.302,1.156 3.99,2.188 true 3.333,1.875 2.208,3.521 2.208,3.521 3.958,2.615 true 3.917,1.75 3.917,0.417 3.917,0.417 4,0.417 true 4.031,0.333 4.344,0.49 0.313,0.156 10 false *1 2.052,3.49 2.365,3.646 0.313,0.156 10 false *a 5.302,1.021 5.615,1.177 0.313,0.156 10 false *b
*1 Console Panel Sub-assembly Upper Rear - -
*a Cup Holder *b 2-point Support



v.

A door pocket, which can accommodate small objects such as pet bottles and documents*, is provided for the front door trim board sub-assembly.

HINT:

*: Certain items may not be able to be stored depending on its size and shape.


V129584C01
4.833,1.833 5.25,2.25 5.25,2.25 5.333,2.25 true 5.365,2.177 5.677,2.333 0.313,0.156 10 false *1 3.625,4.385 3.938,4.542 0.313,0.156 10 false *a
*1 Front Door Trim Board Sub-assembly - -
*a Door Pocket - -



vi.

Enough space is ensured for the luggage compartment to store items such as caddy bags and suitcases.*

V129676

Installation Example*
Caddie Bag 9.5 in. x 2
9.0 in. x 3
Suitcase etc. Suitcase (77 L) x 1 + Roller Bag x 1
Suitcase (58 L) x 2 + Roller Bag x 1
Suitcase (58 L) x 1 + Suitcase (63 L) x 1

HINT:

*: Certain items may not be able to be stored depending on its size and shape.




h.

Functional Items/Equipment

i.

A wireless charging system (mobile wireless charger cradle assembly) is provided in the console panel sub-assembly upper rear, depending on the specification. A wireless charging system is provided in the console panel sub-assembly upper rear in a location that allows wireless chargeable smart phones to be easily charged.

V129587C01
3.844,0.917 3.844,0.167 3.844,0.167 3.927,0.167 true 3.417,2.083 3.417,3.583 3.417,3.583 3.5,3.583 true 3.542,3.521 3.854,3.677 0.313,0.156 10 false *1 3.969,0.104 4.281,0.26 0.313,0.156 10 false *2
*1 Mobile Wireless Charger Cradle Assembly *2 Console Panel Sub-Assembly Upper Rear



ii.

USB charger sockets are provided on the rear of the console box assembly and inside the console box assembly. Attention has been given to ease of use in order to accommodate usage scenarios such as connecting an electronic device such as a cellular telephone, etc. while placed on the console panel sub-assembly upper rear, by providing a cable path to prevent the cable damage.

V129589C01
3.594,0.781 3.594,0.448 3.594,0.448 4.927,0.448 true 3.917,1.167 3.917,0.833 3.917,0.833 4.917,0.833 true 1.417,2.813 1.5,2.813 1.5,2.813 1.5,1.729 true 5,3.583 4.917,3.583 4.917,3.583 4.917,1.833 true 4.948,0.76 5.26,0.917 0.313,0.156 10 false *1 4.948,0.365 5.26,0.521 0.313,0.156 10 false *2 5.031,3.5 5.344,3.656 0.313,0.156 10 false *3 0.583,4.01 0.896,4.167 0.313,0.156 10 false *4 0.25,0.76 0.563,0.917 0.313,0.156 10 false *a 1.26,2.719 1.573,2.875 0.313,0.156 10 false *b 3.281,0.781 3.594,0.938 0.313,0.156 10 false A 4,4 4.313,4.156 0.313,0.156 10 false *4
*1 Mobile Wireless Charger Cradle Assembly *2 Console Panel Sub-assembly Upper Rear
*3 Console Box Assembly *4 USB Port (USB Charger Socket)
*a A View *b Cable Path



iii.

An accessory socket (power outlet socket assembly No. 1) is provided in the console box assembly.

V129590C01
2.917,2.167 4.083,1 4.083,1 4.167,1 true 3.917,2.917 5.083,1.75 5.083,1.75 5.167,1.75 true 4.208,0.938 4.521,1.094 0.313,0.156 10 false *1 5.208,1.688 5.521,1.844 0.313,0.156 10 false *2
*1 Power Outlet Socket Assembly No. 1 *2 Console Box Assembly



iv.

An air purifier and odor elimination type ion generator sub-assembly No. 1 that discharges "nanoe"*1 from the driver side of the instrument cluster finish panel garnish assembly is equipped to make the entire cabin more comfortable.*2

HINT:

There may be cases where "nanoes" do not have a sufficient effect due to cabin conditions (temperature/humidity) or due to air flow volume or direction.

*1: "nanoe" and the "nanoe X" mark are trademarks of Panasonic Corporation.

*2: Models for China


nanoe X (Image is for illustrative purposes only.)
V131492C01
4.042,2.042 5.708,0.375 5.708,0.375 5.792,0.375 true 4.49,2.188 5.573,3.271 5.573,3.271 5.656,3.271 true 5.698,3.188 6.01,3.344 0.313,0.156 10 false *1 5.854,0.313 6.167,0.469 0.313,0.156 10 false *2
*1 Ion Generator Sub-Assembly No. 1 *2 Instrument Cluster Finish Panel Garnish Assembly




i.

Sound absorbing and Vibration Damping Material

i.

All the locations of acoustic insulating materials (sound insulation and absorption materials) in the cabin and luggage space have been optimized, thus creating a quiet drive.

V131496C01
2.25,0.5 3.417,0.5 true 3.5,1.333 3.5,1.167 3.5,1.167 3.75,1.167 true 4.615,2.333 4.615,2.167 4.615,2.167 4.865,2.167 true 6.083,2.833 6.083,2.75 6.083,2.75 6.333,2.75 true 6.083,3 6.083,3.167 6.083,3.167 6.5,3.167 true 6,3.583 6.625,3.583 6.625,3.583 6.625,3.25 true 3,3.333 3,3.917 3,3.917 2.75,3.917 true 2.75,4.083 2.75,3.75 true 2.833,2.75 2.833,2.25 true 2.833,2.5 3.5,2.5 3.5,2.5 3.5,3.25 true 5.417,2.75 5.417,2.083 5.417,2.083 5.5,2.083 true 5.25,3.083 5.25,2.417 5.25,2.417 5.417,2.417 true 1.417,0.99 1.729,1.146 0.313,0.156 10 false *1 3.188,1.51 3.5,1.667 0.313,0.156 10 false *2 5.833,2.521 6.146,2.677 0.313,0.156 10 false *3 6.104,4 6.417,4.156 0.313,0.156 10 false *4 5.594,3.448 5.906,3.604 0.313,0.156 10 false *5 3.792,2.563 4.104,2.719 0.313,0.156 10 false *6 4.469,1.5 4.781,1.656 0.313,0.156 10 false *7 4.385,3.01 4.698,3.167 0.313,0.156 10 false *8 4.969,3.219 5.281,3.375 0.313,0.156 10 false *9 1.771,3.542 2.24,3.698 0.469,0.156 10 false *10 3.042,4.281 3.51,4.438 0.469,0.156 10 false *11 3.698,5.073 4.167,5.229 0.469,0.156 10 false *12 3.021,5.865 3.49,6.021 0.469,0.156 10 false *13 0.917,5.958 1.385,6.115 0.469,0.156 10 false *14 4.51,5.885 4.979,6.042 0.469,0.156 10 false *15 1.948,6.583 2.417,6.74 0.469,0.156 10 false *16 4.792,6.583 5.26,6.74 0.469,0.156 10 false *17 5.688,8.042 6.156,8.198 0.469,0.156 10 false *18 3.844,8.281 4.313,8.438 0.469,0.156 10 false *19 2.219,8.677 2.688,8.833 0.469,0.156 10 false *20 3.781,1.104 4.094,1.26 0.313,0.156 10 false *a 3.448,0.427 3.76,0.583 0.313,0.156 10 false *c 4.896,2.104 5.208,2.26 0.313,0.156 10 false *a 6.375,2.677 6.688,2.833 0.313,0.156 10 false *a 6.542,3.094 6.781,3.24 0.24,0.146 10 false *b 2.688,4.083 3,4.24 0.313,0.156 10 false *a 2.771,2.094 3.083,2.25 0.313,0.156 10 false *a 5.521,2 6,2.167 0.479,0.167 10 false *c (*A)
*A Models for China - -
*1 Roof Headlining Assembly
(Sound Absorption Material)
*2 Front Pillar Garnish Assembly
*3 Roof Side Garnish Assembly Inner *4 Roof Side Rail Garnish Assembly
*5 Roof Side Inner Garnish Cover *6 Front Door Trim Board Sub-assembly
*7 Center Pillar Garnish Assembly *8 Center Pillar Garnish Lower
*9 Rear Door Trim Board Sub-assembly *10 Front Floor Carpet Assembly Front
(Sound Insulation and Absorption Material)
*11 Room Partition Pad No. 1
(Sound Absorption Material)
*12 Floor Mat Front RH
*13 Floor Mat Front Center *14 Floor Mat Front LH
*15 Floor Mat Rear RH
(Sound Absorption Material )
*16 Floor Mat Rear LH
(Sound Absorption Material)
*17 Floor Mat No. 6
(Sound Insulation and Absorption Material)
*18 Luggage Compartment Trim Cover Inner RH
*19 Luggage Compartment Trim Cover Front *20 Luggage Compartment Trim Cover Inner LH
*a Sound Insulation Pad *b Sound Absorption Felt
*c Sound Absorption Thinsulate - -