Home › Vehicle Interior › INTERIOR PANELS / TRIM › REAR SUNSHADE SYSTEM › from 2021.08
NM37H0E _58 Vehicle Interior _097722 INTERIOR PANELS / TRIM _0498531 REAR SUNSHADE SYSTEM CO CONTROL F

INTERIOR PANELS / TRIM  REAR SUNSHADE SYSTEM  CONTROL  REAR SUNSHADE SYSTEM CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function
Rear Window Shade Assembly Rear Sunshade Motor Activates the motor according to operation signals from the automatic curtain control relay.
Hall IC Outputs pulse signals and determines if there is a jam in the rear sunshade according to pulse length.
Automatic Curtain Control Relay
·

Inputs actuation signals from the rear sunshade switch and actuates the sunshade motor.

·

Actuates the sunshade motor in the retraction direction when shift position R signals are received from the main body ECU while the rear sunshade is being deployed.


Multi Display Assembly
·

Rear Sunshade Switch


Outputs a rear sunshade switch operation signal to the automatic curtain control relay.
Cooler Control Switch Assembly (Rear Power Seat Switch)
·

Rear Sunshade Switch


Outputs a rear sunshade switch operation signal to the automatic curtain control relay.
DLC3
·

Can read the Diagnostic Trouble Codes (DTCs) of malfunctions by connecting the Techstream.

·

The Techstream can be connected to change settings as desired by the user.




OPERATION


a.

Deployment/Retraction Operation

i.

When the rear sunshade switch is pressed with the power switch on (IG) while the rear sunshade is retracted, the automatic curtain control relay operates the rear sunshade motor with normal rotation to deploy the rear sunshade. When the deployment of the rear sunshade is completed, the automatic curtain control relay detects the lock current of the motor and stops the operation of the rear sunshade motor.


ii.

When the rear sunshade switch is pressed with the power switch on (IG) while the rear sunshade is in a position other than retracted, the automatic curtain control relay operates the rear sunshade motor in reverse to retract the rear sunshade. When the retraction of the rear sunshade is completed, the automatic curtain control relay detects the lock current of the rear sunshade motor and stops the operation of the rear sunshade motor.

Y268398C01
0.667,2.167 1.542,2.167 true 0.667,3.25 1.563,3.25 true 2.083,4.25 1.25,5.083 1.25,5.083 1.083,5.083 true 4.438,5.125 4.271,5.125 4.271,5.125 3.604,4.458 true 6,5.083 5.833,5.083 5.833,5.083 4.917,4.167 true 5.667,3.25 6.5,3.25 true 5.667,2.167 6.5,2.167 true 3.5,1.667 2.667,0.833 2.667,0.833 2.5,0.833 true 4.438,4.802 4.271,4.802 4.271,4.802 3.688,4.219 true 2.333,0.771 2.646,0.927 0.313,0.156 10 false *1 0.438,2.094 0.75,2.25 0.313,0.156 10 false *2 0.458,3.177 0.771,3.333 0.313,0.156 10 false *3 0.885,5.021 1.198,5.177 0.313,0.156 10 false *4 4.479,5.063 4.823,5.24 0.344,0.177 10 false *6 6.063,5.021 6.354,5.177 0.292,0.156 10 false *7 6.563,3.188 6.844,3.354 0.281,0.167 10 false *8 6.552,2.094 6.833,2.25 0.281,0.156 10 false *9 0.552,1.188 1.021,1.344 0.469,0.156 10 false *a 0.573,3.74 1.042,3.896 0.469,0.156 10 false *b 4.49,4.75 4.802,4.906 0.313,0.156 10 false *5
*1 Rear Window Shade Assembly *2 Upper Arm LH
*3 Lower Arm LH *4 Link Rod LH
*5 Rear Sunshade Motor *6 Automatic Curtain Control Relay
*7 Link Rod RH *8 Lower Arm RH
*9 Upper Arm RH - -
*a Sunshade Deployment Position *b Sunshade Retraction Position
V100135

Sunshade Deployment Operation Direction
V100136

Sunshade Retraction Operation Direction




b.

Reverse-linked Operation

i.

When the shift position is changed to R, the rear sunshade motor of the rear window shade assembly is rotated in the retraction direction to retract the rear sunshade.


ii.

When any of the following conditions is met after the rear sunshade is retracted by a reverse-linked operation, the rear sunshade deploys.

·

The rear sunshade switch is pushed.

·

The shift position is changed to P.

·

The shift position is changed to a position other than P and R and the vehicle speed becomes 15 km/h (9 mph) or more.


HINT:

When the power switch is turned off with the rear sunshade retracted via a reverse-linked operation, if the power switch is turned on (IG) and the vehicle is driven at 15 km/h (9 mph), the rear sunshade does not deploy. In that case, push the rear sunshade switch to deploy the rear sunshade.




c.

Key-off Operation

i.

Rear sunshade operations are only possible for approximately 60 seconds after the power switch is turned from on (IG) to on (ACC) or off.




FAIL-SAFE


a.

When a malfunction is detected in the Hall IC that detects the position, speed and direction of the rear sunshade, the auto curtain control relay enter fail-safe mode via the self-diagnostic function.

Fail-safe Detection Items
No. Item Situation Operation after Detection
1 Pulse Sensor Malfunction (Single Pulse) Occurs when a certain value or more of only one pulse of 2 pulses is detected. Motor stops
2 Pulse Direction Abnormality Occurs when the rear sunshade motor actuation direction and reverse direction pulses are sent in succession when the rear sunshade is opening or closing, and a value greater than or equal to the specified quantity is detected. Motor stops