CONSTRUCTION
Body Shell
The position of the body's structural parts is optimized, optimized connection methods are used and reinforcing materials are provided, creating a lightweight body structure with high rigidity and ensuring driving stability.
Fuel Cell Unit Compartment Brace
6 braces are optimally positioned inside the fuel cell unit compartment to achieve high rigidity in the front body. As a result, superior driving stability is achieved.
| *1 | Fender Apron Brace Sub-assembly RH | *2 | Fender Apron Brace Sub-assembly LH |
| *3 | Radiator Support To Cross Member Brace Sub-assembly RH | *4 | Radiator Support To Cross Member Brace Sub-assembly LH |
| *5 | Radiator Support Brace Upper RH | *6 | Radiator Support Brace Upper LH |
Suspension Tower
An aluminum die-cast* suspension tower (front spring support) is used to optimize the thickness and rib shape to achieve superior body rigidity and weight reduction.
*: A method in which molten aluminum alloy, zinc alloy, etc. are forced into a mold cavity under high pressure to forge parts.
| *1 | Front Spring Support RH | *2 | Front Spring Support LH |
| *3 | Front Suspension | - | - |
| *a | A - A Cross Section | *b | Rib Shape Increases Rigidity of Suspension Installation Area |
Cowl Top Side Stiffening Structure
The cowl is given an underbody structure that connects the closed cross section of the cowl to the front body pillars and creates a ring structure for the cowl and instrument panel reinforcement assembly to achieve high rigidity for the cowl area. As a result, superior driving stability is achieved.
| *A | Conventional Welding Method | *B | MIRAI |
| *1 | Cowl Top Side Panel LH | *2 | Front Body Pillar Gusset LWR LH |
| *a | Service Hole | *b | Drainage Hole |
Cowl and Instrument Panel Reinforcement Ring Structure
The cowl is given an underbody structure that connects the closed cross section of the cowl to the front body pillars and creates a ring structure for the cowl and instrument panel reinforcement assembly to achieve high rigidity for the cowl area. As a result, superior driving stability is achieved.
| *1 | Instrument Panel To Cowl Bracket No. 1 | *2 | Cowl Top Reinforcement INNER |
| *3 | Instrument Panel To Cowl Bracket No. 2 | *4 | Instrument Panel Reinforcement Assembly |
| *a | A - A Cross Section | *b | Ring Structure |
| *c | Closed Cross Section | - | - |
Rocker
A large rocker cross section is provided to increase body rigidity, achieving superior driving stability.
| *A | Conventional Model | *B | MIRAI |
| *a | A - A Cross Section | - | - |
Floor Cross Member Continuous Flange Structure
A continuous flange is used in the floor cross member frame connection area to increase the rigidity of the frame connection, achieving superior driving stability.
| *A | Conventional Model | *B | MIRAI |
| *1 | Front Floor Cross Member RH | *2 | Front Floor Cross Member LH |
| *3 | Front Floor Cross Side Member RH | *4 | Front Floor Cross Side Member LH |
| *a | Floor Cross Member Frame Connection Area | *b | Cutout |
| *c | Continuous Flange | - | - |
Rear Floor Cross Member
A rear floor cross member (rear floor cross member FR), which connects both sides of the rear wheel house, is provided to increase vehicle torsional rigidity, achieving superior driving stability.
| *1 | Rear Floor Cross Member FR | - | - |
| *a | Rear Wheel House | - | - |
Structural Adhesive, Laser Welding, Laser Screw Welding (LSW)
Structural adhesive*1, laser welding*2 and Laser Screw Welding (LSW)*3 are used over a large range to increase panel connecting rigidity, ensuring superior driving stability (steering response and feeling).
*1: Compared to conventional spot welding where panels are only connected at certain points, this adhesive is used together with welds to connect body surfaces, minimizing bending and warping to maximize rigidity.
*2: This method increases panel connectivity in a line between spot welding points by using a connection method that uses a laser as a main heat source to concentrate light on the metal, melting and solidifying it in a localized area.
*3: Compared to conventional spot welding, this method reduces the pitch of welding points, allowing them to be concentrated in areas that need to be connected. Connections can be concentrated around frame openings to strengthen the structure of the vehicle.
| *a | Structural Adhesive | *b | Laser Welding |
| *c | LSW | - | - |
| *a | Structural Adhesive | - | - |