Home › Vehicle Exterior › ACOUSTIC VEHICLE ALERTING SYSTEM › VEHICLE APPROACHING SPEAKER
RM37H0E _59 Vehicle Exterior _095082 ACOUSTIC VEHICLE ALERTING SYSTEM _0447048 VEHICLE APPROACHING SPEAKER G

ACOUSTIC VEHICLE ALERTING SYSTEM  VEHICLE APPROACHING SPEAKER  INSPECTION  


PROCEDURE

Hide 86570 1.INSPECT VEHICLE APPROACHING SPEAKER ASSEMBLY

a.
E220216C56
1.563,0.281 1.896,0.542 0.333,0.26 1.313,1.677 1.563,1.271 false 1.896,1.26 2.125,1.667 false 0.229,0.156 0.417,0.344 0.188,0.188 10 false *a 1.615,0.333 1.917,0.531 0.302,0.198 10 false A25 1.198,1.656 1.354,1.854 0.156,0.198 10 false + 2.167,1.656 2.323,1.854 0.156,0.198 10 false -
*a Component without harness connected
(Vehicle Approaching Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(A25)Location & Routing

Click Connector(A25)Engine Compartment>Front Compartment Main Wire / No. 3 Front Compartment Wire / No. 4 Front Compartment Wire>Vehicle Approaching Speaker Assembly

A25-2(+) - A25-1(-) Always 3.2 to 4.8 Ω



b.

Check the speaker and bracket for cracks or damage.

If the result is not as specified, replace the vehicle approaching speaker assembly.