86510
1.INSPECT HIGH PITCHED HORN ASSEMBLY
| *a | Component without harness connected
(High Pitched Horn Assembly) |
Apply auxiliary battery voltage and check operation of the high pitched horn according to the table below.
| Tester Connection | Specified Condition |
|---|---|
|
Click Location & Routing(A36)Location & Routingewd_type=routing;type=c;code=A36 Click Connector(A36)Engine Compartment>Front Compartment Main Wire / No. 3 Front Compartment Wire / No. 4 Front Compartment Wire>High Pitched Horn Assemblyewd_type=component;type=c;code=A36;pinno=1 |
|
| A36-1 - Auxiliary battery positive (+)
Horn stay - Auxiliary battery negative (-) |
High pitched horn sounds |
If the result is not as specified, replace the high pitched horn assembly.
86520
2.INSPECT LOW PITCHED HORN ASSEMBLY
| *a | Component without harness connected
(Low Pitched Horn Assembly) |
Apply auxiliary battery voltage and check operation of the low pitched horn according to the table below.
| Tester Connection | Specified Condition |
|---|---|
|
Click Location & Routing(A38)Location & Routingewd_type=routing;type=c;code=A38 Click Connector(A38)Engine Compartment>Front Compartment Main Wire / No. 3 Front Compartment Wire / No. 4 Front Compartment Wire>Low Pitched Horn Assemblyewd_type=component;type=c;code=A38;pinno=1 |
|
| A38-1 - Auxiliary battery positive (+)
Horn stay - Auxiliary battery negative (-) |
Low pitched horn sounds |
If the result is not as specified, replace the low pitched horn assembly.