Home › Audio / Visual / Telematics › AUDIO / VIDEO › FRONT DOOR SPEAKER
RM37H0E _56 Audio / Visual / Telematics _095260 AUDIO / VIDEO _0448056 FRONT DOOR SPEAKER G

AUDIO / VIDEO  FRONT DOOR SPEAKER  INSPECTION  


PROCEDURE

Hide 86160 1.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY (for LH Side)

a.

With the speaker in the installed condition, check there are no abnormalities such looseness or rattling.


b.

Check that there is no foreign matter inside the speaker.


c.

Check that the speaker cone is not damaged.


d.
E364209C67
1.563,0.292 1.958,0.51 0.396,0.219 1,1.26 1.542,1.26 true 1.896,1.26 2.438,1.26 true 0.135,0.094 0.448,0.292 0.313,0.198 10 false *a 1.604,0.313 1.906,0.5 0.302,0.188 10 false E19 0.823,1.198 0.979,1.396 0.156,0.198 10 false + 2.49,1.167 2.646,1.365 0.156,0.198 10 false -
*a Component without harness connected
(Front No. 1 Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

i.

for 6 Speakers:

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(E19)Location & Routing

Click Connector(E19)Body>Front Door Wire LH / Front Door Wire RH>Front No. 1 Speaker Assembly LH

E19-1(-) - E19-2(+) Always 4 Ω


If the result is not as specified, replace the front No. 1 speaker assembly.


ii.

for 14 Speakers:

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(E19)Location & Routing

Click Connector(E19)Body>Front Door Wire LH / Front Door Wire RH>Front No. 1 Speaker Assembly LH

E19-1(-) - E19-2(+) Always 4.5 to 6.7 Ω


If the result is not as specified, replace the front No. 1 speaker assembly.



Hide 86160 2.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY (for RH Side)

a.

With the speaker in the installed condition, check there are no abnormalities such looseness or rattling.


b.

Check that there is no foreign matter inside the speaker.


c.

Check that the speaker cone is not damaged.


d.
E364209C66
1.594,0.354 1.896,0.563 0.302,0.208 0.948,1.26 1.542,1.26 true 1.906,1.25 2.5,1.25 true 0.135,0.094 0.448,0.292 0.313,0.198 10 false *a 1.646,0.375 1.865,0.552 0.219,0.177 10 false E1 0.771,1.167 0.927,1.365 0.156,0.198 10 false + 2.552,1.146 2.708,1.344 0.156,0.198 10 false -
*a Component without harness connected
(Front No. 1 Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

i.

for 6 Speakers:

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(E1)Location & Routing

Click Connector(E1)Body>Front Door Wire LH / Front Door Wire RH>Front No. 1 Speaker Assembly RH

E1-1(-) - E1-2(+) Always 4 Ω


If the result is not as specified, replace the front No. 1 speaker assembly.


ii.

for 14 Speakers:

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(E1)Location & Routing

Click Connector(E1)Body>Front Door Wire LH / Front Door Wire RH>Front No. 1 Speaker Assembly RH

E1-1(-) - E1-2(+) Always 4.5 to 6.7 Ω


If the result is not as specified, replace the front No. 1 speaker assembly.