Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG CUT-OFF INDICATOR LIGHT
RM37H0E _58 Vehicle Interior _095287 SUPPLEMENTAL RESTRAINT SYSTEMS _0448082 AIRBAG CUT-OFF INDICATOR LIGHT G

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG CUT-OFF INDICATOR LIGHT  INSPECTION  


PROCEDURE

Hide 83950M 1.INSPECT TELLTALE LIGHT ASSEMBLY (AIRBAG CUT-OFF INDICATOR LIGHT)

a.
C220881C15
1.49,0.198 1.927,0.438 0.438,0.24 0.781,1.115 1.385,1.115 true 1.052,0.573 1.563,1.031 true 2.167,0.563 1.875,1.052 true 2.01,1.333 2.521,1.792 true 0.094,0.073 0.406,0.229 0.313,0.156 10 false *a 0.51,1.021 0.969,1.219 0.458,0.198 10 false IG+ 2.219,0.458 2.833,0.656 0.615,0.198 10 false P-AB 0.74,0.469 1.354,0.667 0.615,0.198 10 false ILL+ 2.5,1.813 2.656,2.01 0.156,0.198 10 false E 1.583,0.229 2.042,0.427 0.458,0.198 10 false D38
*a Component without harness connected
(Telltale Light Assembly)


Apply auxiliary battery voltage to the connector and check the airbag off indicator illumination conditions.

OK:
Tester Connection Specified Condition

If the result is not as specified, replace the telltale light assembly.

Click Location & Routing(D38)Location & Routing

Click Connector(D38)Instrument Panel>Instrument Panel Wire>Telltale Light Assembly

Auxiliary battery positive (+) - D38-5 (IG+)
Auxiliary battery negative (-) - D38-2 (P-AB)
Airbag off indicator illuminates
Auxiliary battery positive (+) - D38-5 (IG+)
Auxiliary battery positive (+) - D38-4 (ILL+)
Auxiliary battery negative (-) - D38-2 (P-AB)
Auxiliary battery negative (-) - D38-6 (E)
Airbag off indicator illuminates in dimmed state



b.
C220881C16
1.49,0.198 1.927,0.438 0.438,0.24 0.781,1.115 1.385,1.115 true 1.052,0.573 1.563,1.031 true 2.313,0.563 2.021,1.052 true 2.01,1.333 2.521,1.792 true 0.094,0.073 0.406,0.229 0.313,0.156 10 false *a 0.51,1.021 0.969,1.219 0.458,0.198 10 false IG+ 2.375,0.448 2.99,0.646 0.615,0.198 10 false PAON 0.74,0.469 1.354,0.667 0.615,0.198 10 false ILL+ 2.5,1.813 2.656,2.01 0.156,0.198 10 false E 1.583,0.229 2.042,0.427 0.458,0.198 10 false D38
*a Component without harness connected
(Telltale Light Assembly)


Apply auxiliary battery voltage to the connector and check the airbag on indicator illumination conditions.

OK:
Tester Connection Specified Condition

If the result is not as specified, replace the telltale light assembly.

Click Location & Routing(D38)Location & Routing

Click Connector(D38)Instrument Panel>Instrument Panel Wire>Telltale Light Assembly

Auxiliary battery positive (+) - D38-5 (IG+)
Auxiliary battery negative (-) - D38-1 (PAON)
Airbag on indicator illuminates
Auxiliary battery positive (+) - D38-5 (IG+)
Auxiliary battery positive (+) - D38-4 (ILL+)
Auxiliary battery negative (-) - D38-1 (PAON)
Auxiliary battery negative (-) - D38-6 (E)
Airbag on indicator illuminates in dimmed state