Home › Vehicle Interior › SEAT › REAR SEAT CUSHION HEATER
RM37H0E _58 Vehicle Interior _095292 SEAT _0448109 REAR SEAT CUSHION HEATER G

SEAT  REAR SEAT CUSHION HEATER  INSPECTION  


PROCEDURE

Hide 87510P 1.INSPECT SEAT CUSHION HEATER ASSEMBLY RH

a.
B601516C04
1.542,0.75 1.917,1 0.375,0.25 1.688,0.802 1.844,1 0.156,0.198 10 false A 0.083,0.083 0.396,0.24 0.313,0.156 10 false *a
*a Component without harness connected
(Seat Cushion Heater Assembly RH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A2 - A3 Always 20°C (68°F) 11.9 to 12.3 kΩ
A4 - A5 Always 20°C (68°F) Below 1 Ω
A4 - A7 Always 20°C (68°F) 3.22 to 3.94 Ω
A5 - A7 Always 20°C (68°F) 3.22 to 3.94 Ω


If the result is not as specified, replace the seat cushion heater assembly RH.


Hide 87510Q 2.INSPECT SEAT CUSHION HEATER ASSEMBLY LH

a.
B601516C05
1.542,0.75 1.917,1 0.375,0.25 1.688,0.802 1.844,1 0.156,0.198 10 false A 0.083,0.083 0.396,0.24 0.313,0.156 10 false *a
*a Component without harness connected
(Seat Cushion Heater Assembly LH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A2 - A3 Always 20°C (68°F) 11.9 to 12.3 kΩ
A4 - A5 Always 20°C (68°F) Below 1 Ω
A4 - A7 Always 20°C (68°F) 3.22 to 3.94 Ω
A5 - A7 Always 20°C (68°F) 3.22 to 3.94 Ω


If the result is not as specified, replace the seat cushion heater assembly LH.