Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR
RM37H0E _58 Vehicle Interior _095297 SEAT BELT _0448149 OCCUPANT DETECTION SENSOR G

SEAT BELT  OCCUPANT DETECTION SENSOR  INSPECTION  


PROCEDURE

Hide 71512S 1.INSPECT SEPARATE TYPE FRONT SEAT CUSHION PAD RH (OCCUPANT DETECTION SENSOR) (for LHD)

a.
B218574C58
0.115,0.104 0.427,0.302 0.313,0.198 10 false *a
*a Component without harness connected
(Separate Type Front Seat Cushion Pad RH (Occupant Detection Sensor))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 3 Front passenger seat occupied Below 100 Ω
1 - 3 Front passenger seat not occupied 1 MΩ or higher


If the result is not as specified, replace the separate type front seat cushion pad RH (occupant detection sensor).


Hide 71511S 2.INSPECT SEPARATE TYPE FRONT SEAT CUSHION PAD LH (OCCUPANT DETECTION SENSOR) (for RHD)

a.
B218574C59
0.094,0.094 0.406,0.292 0.313,0.198 10 false *a
*a Component without harness connected
(Separate Type Front Seat Cushion Pad LH (Occupant Detection Sensor))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 3 Front passenger seat occupied Below 100 Ω
1 - 3 Front passenger seat not occupied 1 MΩ or higher


If the result is not as specified, replace the separate type front seat cushion pad LH (occupant detection sensor).