Home › Vehicle Exterior › MIRROR (EXT) › RELAY
RM37H0E _59 Vehicle Exterior _095308 MIRROR (EXT) _0448229 RELAY G

MIRROR (EXT)  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 87989 1.INSPECT MIRROR NO. 1 RELAY

a.
B513841N03
2.75,1.417 2.75,1.25 2.75,1.25 2.833,1.25 false 2.49,1.427 2.49,1.26 2.49,1.26 2.573,1.26 false 2.24,1.438 2.24,1.271 2.24,1.271 2.323,1.271 false 2.417,0.865 2.667,0.865 2.667,0.865 2.667,0.948 false 2.406,0.448 2.656,0.448 2.656,0.448 2.656,0.531 false 2.729,1.448 2.885,1.646 0.156,0.198 10 false 1 2.458,1.458 2.615,1.656 0.156,0.198 10 false 4 2.208,1.458 2.365,1.656 0.156,0.198 10 false 2 2.323,0.813 2.479,1.01 0.156,0.198 10 false 5 2.313,0.385 2.469,0.583 0.156,0.198 10 false 3

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 4 Auxiliary battery voltage applied to terminals 1 and 2 10 kΩ or higher
3 - 4 Auxiliary battery voltage not applied between terminals Below 1 Ω
3 - 5 Auxiliary battery voltage applied to terminals 1 and 2 Below 1 Ω
3 - 5 Auxiliary battery voltage not applied between terminals 10 kΩ or higher
4 - 5 Always 10 kΩ or higher


If the result is not as specified, replace the mirror No. 1 relay.


Hide 87989 2.INSPECT MIRROR NO. 2 RELAY

a.
B513841N04
2.75,1.417 2.75,1.25 2.75,1.25 2.833,1.25 false 2.49,1.427 2.49,1.26 2.49,1.26 2.573,1.26 false 2.24,1.438 2.24,1.271 2.24,1.271 2.323,1.271 false 2.417,0.865 2.667,0.865 2.667,0.865 2.667,0.948 false 2.406,0.448 2.656,0.448 2.656,0.448 2.656,0.531 false 2.729,1.448 2.885,1.646 0.156,0.198 10 false 1 2.458,1.458 2.615,1.656 0.156,0.198 10 false 4 2.208,1.458 2.365,1.656 0.156,0.198 10 false 2 2.323,0.813 2.479,1.01 0.156,0.198 10 false 5 2.313,0.385 2.469,0.583 0.156,0.198 10 false 3

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 4 Auxiliary battery voltage applied to terminals 1 and 2 10 kΩ or higher
3 - 4 Auxiliary battery voltage not applied between terminals Below 1 Ω
3 - 5 Auxiliary battery voltage applied to terminals 1 and 2 Below 1 Ω
3 - 5 Auxiliary battery voltage not applied between terminals 10 kΩ or higher
4 - 5 Always 10 kΩ or higher


If the result is not as specified, replace the mirror No. 2 relay.