81080M
1.INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY (for LH Side)
Check the illumination.
| *a | Component without harness connected
(No. 1 Interior Illumination Light Assembly) |
Apply auxiliary battery voltage to the connector and check the light illumination condition.
| Tester Connection | Specified Condition |
|---|---|
|
Click Location & Routing(E37)Location & Routingewd_type=routing;type=c;code=E37 |
|
| E37-1 (+B) - Auxiliary battery positive (+)
E37-2 (ILL2) - Auxiliary battery negative (-) |
Red light illuminates |
| E37-1 (+B) - Auxiliary battery positive (+)
E37-3 (ILL3) - Auxiliary battery negative (-) |
Green light illuminates |
| E37-1 (+B) - Auxiliary battery positive (+)
E37-4 (ILL1) - Auxiliary battery negative (-) |
Blue light illuminates |
If the result is not as specified, replace the No. 1 interior illumination light assembly.
81080M
2.INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY (for RH Side)
Check the illumination.
| *a | Component without harness connected
(No. 1 Interior Illumination Light Assembly) |
Apply auxiliary battery voltage to the connector and check the light illumination condition.
| Tester Connection | Specified Condition |
|---|---|
|
Click Location & Routing(E36)Location & Routingewd_type=routing;type=c;code=E36 |
|
| E36-1 (+B) - Auxiliary battery positive (+)
E36-2 (ILL2) - Auxiliary battery negative (-) |
Red light illuminates |
| E36-1 (+B) - Auxiliary battery positive (+)
E36-3 (ILL3) - Auxiliary battery negative (-) |
Green light illuminates |
| E36-1 (+B) - Auxiliary battery positive (+)
E36-4 (ILL1) - Auxiliary battery negative (-) |
Blue light illuminates |
If the result is not as specified, replace the No. 1 interior illumination light assembly.