Home › Vehicle Exterior › LIGHTING (EXT) › SIDE TURN SIGNAL LIGHT ASSEMBLY
RM37H0E _59 Vehicle Exterior _093353 LIGHTING (EXT) _0448242 SIDE TURN SIGNAL LIGHT ASSEMBLY G

LIGHTING (EXT)  SIDE TURN SIGNAL LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81740 1.INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH

a.

Check the illumination.

i.
E221729C01
0.176,0.088 0.388,0.275 0.212,0.188 10 *a
*a Component without harness connected
(Side Turn Signal Light Assembly LH)


Apply battery voltage to the connector and check the light illumination conditions.

OK:
Condition Specified Condition
Auxiliary battery positive (+) - Terminal 1
Auxiliary battery negative (-) - Terminal 2
Side turn signal light assembly LH illuminates


HINT:

If the result is not as specified, replace the side turn signal light assembly LH.




Hide 81730 2.INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH

a.

Check the illumination.

i.
E221729C01
0.176,0.088 0.388,0.275 0.212,0.188 10 *a
*a Component without harness connected
(Side Turn Signal Light Assembly RH)


Apply battery voltage to the connector and check the light illumination conditions.

OK:
Condition Specified Condition
Auxiliary battery positive (+) - Terminal 1
Auxiliary battery negative (-) - Terminal 2
Side turn signal light assembly RH illuminates


HINT:

If the result is not as specified, replace the side turn signal light assembly RH.