81270
1.INSPECT LICENSE PLATE LIGHT ASSEMBLY (for LH Side)
| *a | Component without harness connected
(License Plate Light Assembly) |
Check the illumination.
Apply auxiliary battery voltage to the license plate light assembly and check that the lights illuminate.
| Tester Connection | Specified Condition |
|---|---|
|
Click Location & Routing(K7)Location & Routingewd_type=routing;type=c;code=K7 Click Connector(K7)Body>No. 1 Back Door Wire>License Plate Light Assembly LHewd_type=component;type=c;code=K7;pinno=1,2 |
|
| Auxiliary battery positive (+) - Terminal K7-1 (B)
Auxiliary battery negative (-) - Terminal K7-2 (E) |
License plate light assembly comes on |
If the result is not as specified, replace the license plate light assembly.
81270
2.INSPECT LICENSE PLATE LIGHT ASSEMBLY (for RH Side)
| *a | Component without harness connected
(License Plate Light Assembly) |
Check the illumination.
Apply auxiliary battery voltage to the license plate light assembly and check that the lights illuminate.
| Tester Connection | Specified Condition |
|---|---|
|
Click Location & Routing(K8)Location & Routingewd_type=routing;type=c;code=K8 Click Connector(K8)Body>No. 1 Back Door Wire>License Plate Light Assembly RHewd_type=component;type=c;code=K8;pinno=1,2 |
|
| Auxiliary battery positive (+) - Terminal K8-1 (B)
Auxiliary battery negative (-) - Terminal K8-2 (E) |
License plate light assembly comes on |
If the result is not as specified, replace the license plate light assembly.