Home › Vehicle Exterior › LIGHTING (EXT) › HIGH MOUNTED STOP LIGHT ASSEMBLY
RM37H0E _59 Vehicle Exterior _093353 LIGHTING (EXT) _0448246 HIGH MOUNTED STOP LIGHT ASSEMBLY G

LIGHTING (EXT)  HIGH MOUNTED STOP LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81570 1.INSPECT CENTER STOP LIGHT ASSEMBLY

a.

Check the illumination.

i.
E361681C01
0.188,0.146 0.5,0.302 0.313,0.156 10 false *a
*a Component without harness connected
(Center Stop Light Assembly)


Apply auxiliary battery voltage to the center stop light assembly and check that the light illuminates.

OK:
Tester Connection Specified Condition
Auxiliary battery positive (+) - Terminal 1
Auxiliary battery negative (-) - Terminal 2
Center stop light assembly illuminates


HINT:

If the result is not as specified, replace the center stop light assembly.