81080V
1.INSPECT NO. 2 INTERIOR ILLUMINATION LIGHT ASSEMBLY (for LH Side)
Check the illumination.
| *a | Component without harness connected
(No. 2 Interior Illumination Light Assembly) |
Apply auxiliary battery voltage to the connector and check the light illumination condition.
| Tester Connection | Specified Condition |
|---|---|
|
Click Location & Routing(E27)Location & Routingewd_type=routing;type=c;code=E27 |
|
| E27-1 (+B) - Auxiliary battery positive (+)
E27-2 (ILL2) - Auxiliary battery negative (-) |
Red light illuminates |
| E27-1 (+B) - Auxiliary battery positive (+)
E27-3 (ILL3) - Auxiliary battery negative (-) |
Green light illuminates |
| E27-1 (+B) - Auxiliary battery positive (+)
E27-4 (ILL1) - Auxiliary battery negative (-) |
Blue light illuminates |
If the result is not as specified, replace the No. 2 interior illumination light assembly.
81080V
2.INSPECT NO. 2 INTERIOR ILLUMINATION LIGHT ASSEMBLY (for RH Side)
Check the illumination.
| *a | Component without harness connected
(No. 2 Interior Illumination Light Assembly) |
Apply auxiliary battery voltage to the connector and check the light illumination condition.
| Tester Connection | Specified Condition |
|---|---|
|
Click Location & Routing(E9)Location & Routingewd_type=routing;type=c;code=E9 |
|
| E9-1 (+B) - Auxiliary battery positive (+)
E9-2 (ILL2) - Auxiliary battery negative (-) |
Red light illuminates |
| E9-1 (+B) - Auxiliary battery positive (+)
E9-3 (ILL3) - Auxiliary battery negative (-) |
Green light illuminates |
| E9-1 (+B) - Auxiliary battery positive (+)
E9-4 (ILL1) - Auxiliary battery negative (-) |
Blue light illuminates |
If the result is not as specified, replace the No. 2 interior illumination light assembly.