81080V
1.INSPECT NO. 2 INTERIOR ILLUMINATION LIGHT ASSEMBLY (for LH Side)
Check the illumination.
| *a | Component without harness connected
(No. 2 Interior Illumination Light Assembly) |
Apply auxiliary battery voltage to the connector and check the light illumination condition.
| Tester Connection | Specified Condition |
|---|---|
|
Click Location & Routing(F19)Location & Routingewd_type=routing;type=c;code=F19 |
|
| F19-1 (+B) - Auxiliary battery positive (+)
F19-2 (ILL2) - Auxiliary battery negative (-) |
Red light illuminates |
| F19-1 (+B) - Auxiliary battery positive (+)
F19-3 (ILL3) - Auxiliary battery negative (-) |
Green light illuminates |
| F19-1 (+B) - Auxiliary battery positive (+)
F19-4 (ILL1) - Auxiliary battery negative (-) |
Blue light illuminates |
If the result is not as specified, replace the No. 2 interior illumination light assembly.
81080V
2.INSPECT NO. 2 INTERIOR ILLUMINATION LIGHT ASSEMBLY (for RH Side)
Check the illumination.
| *a | Component without harness connected
(No. 2 Interior Illumination Light Assembly) |
Apply auxiliary battery voltage to the connector and check the light illumination condition.
| Tester Connection | Specified Condition |
|---|---|
|
Click Location & Routing(F8)Location & Routingewd_type=routing;type=c;code=F8 |
|
| F8-1 (+B) - Auxiliary battery positive (+)
F8-2 (ILL2) - Auxiliary battery negative (-) |
Red light illuminates |
| F8-1 (+B) - Auxiliary battery positive (+)
F8-3 (ILL3) - Auxiliary battery negative (-) |
Green light illuminates |
| F8-1 (+B) - Auxiliary battery positive (+)
F8-4 (ILL1) - Auxiliary battery negative (-) |
Blue light illuminates |
If the result is not as specified, replace the No. 2 interior illumination light assembly.