81081
1.INSPECT INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY
| *a | Component without harness connected
(Interior Illumination Light Sub-assembly) |
Check the illumination.
Apply auxiliary battery voltage to the connector and check the light illumination condition.
| Tester Connection | Specified Condition |
|---|---|
|
Click Location & Routing(H3)Location & Routingewd_type=routing;type=c;code=H3 Click Connector(H3)Body>No. 1 Roof Wire>Interior Illumination Light Sub-Assemblyewd_type=component;type=c;code=H3;pinno=1,2 |
|
| H3-1 (ILL+) - Auxiliary battery positive (+)
H3-2 (ILL-) - Auxiliary battery negative (-) |
Interior illumination light sub-assembly illuminates |
If the result is not as specified, replace the interior illumination light sub-assembly.