Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM
RM37H0E _59 Vehicle Exterior _093353 LIGHTING (EXT) _0448416 LIGHTING SYSTEM C

LIGHTING (EXT)  LIGHTING SYSTEM  B2414  Steering Position Sensor Malfunction  


DESCRIPTION

The headlight ECU sub-assembly LH receives steering angle signals from the steering sensor via CAN communication and performs light control.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority Note
B2414 Steering Position Sensor Malfunction
Detection condition:

Ignition switch ON


Malfunction status:

Sensor malfunction signals are continuously received from the steering sensor


Malfunction duration:

10 seconds or more


Electronically controlled brake system AFS B w/ Adaptive High Beam System

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority Note
B2414 Steering Position Sensor Malfunction
Detection condition:

Ignition switch ON


Malfunction status:

Sensor malfunction signals are continuously received from the steering sensor


Malfunction duration:

10 seconds or more


Electronically controlled brake system HL AutoLeveling B w/o Adaptive High Beam System

WIRING DIAGRAM

E346680E09
1.365,1.573 3.656,1.771 2.292,0.198 10 false Steering Sensor 0.781,2.24 3.073,2.438 2.292,0.198 10 false : CAN communication Line 4.646,1.573 7.115,1.833 2.469,0.26 10 false Headlight ECU Sub-assembly LH

PROCEDURE

1.CHECK VEHICLE TYPE
a.

Check vehicle condition.


Result:
Result Proceed to
w/ Adaptive High Beam System A
w/o Adaptive High Beam System B



A

2.CLEAR DTC

B

4.CLEAR DTC
2.CLEAR DTC

Pre-procedure1

a.

None


Procedure1

a.

Clear the DTCs.

Body Electrical > AFS > Clear DTCs
50002 165
Result:
Proceed to
NEXT



Post-procedure1

a.

None



NEXT

3.CHECK FOR DTC
3.CHECK FOR DTC

Pre-procedure1

a.

Turn the ignition switch ON and wait for at least 10 seconds or more.


Procedure1

a.

Check for DTCs.

Body Electrical > AFS > Trouble Codes
50001 165
Result:
Result Proceed to
B2414 is not output A
B2414 is output B



Post-procedure1

a.

None



A

B

4.CLEAR DTC

Pre-procedure1

a.

None


Procedure1

a.

Clear the DTCs.

Body Electrical > HL AutoLeveling > Trouble Codes
50001 361
Result:
Proceed to
NEXT



Post-procedure1

a.

None



NEXT

5.CHECK FOR DTC
5.CHECK FOR DTC

Pre-procedure1

a.

Turn the ignition switch ON and wait for at least 10 seconds or more.


Procedure1

a.

Check for DTCs.

Body Electrical > HL AutoLeveling > Trouble Codes
50001 361
Result:
Result Proceed to
B2414 is not output A
B2414 is output B



Post-procedure1

a.

None



A

B