Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM
RM37H0E _59 Vehicle Exterior _093353 LIGHTING (EXT) _0448416 LIGHTING SYSTEM C

LIGHTING (EXT)  LIGHTING SYSTEM  B2415  Vehicle Speed Sensor Malfunction  


DESCRIPTION

The headlight ECU sub-assembly LH receives speed signals from the skid control ECU assembly via CAN communication and performs light control.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority Note
B2415 Vehicle Speed Sensor Malfunction
Detection condition:

Ignition switch ON


Malfunction status:

Wheel speed sensor invalid signals are continuously received from the skid control ECU assembly


Malfunction duration:

10 seconds or more


Electronically controlled brake system AFS B w/ Adaptive High Beam System

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority Note
B2415 Vehicle Speed Sensor Malfunction
Detection condition:

Ignition switch ON


Malfunction status:

Wheel speed sensor invalid signals are continuously received from the skid control ECU assembly


Malfunction duration:

10 seconds or more


Electronically controlled brake system HL AutoLeveling B w/ Adaptive High Beam System

WIRING DIAGRAM

E346695E14
4.635,1.583 7.104,2 2.469,0.417 10 false Headlight ECU Sub-assembly LH 1.208,1.583 3.052,1.979 1.844,0.396 10 false Skid Control ECU Assembly 0.729,2.208 2.469,2.604 1.74,0.396 10 false : CAN Communication Line

PROCEDURE

1.CHECK VEHICLE TYPE
a.

Check vehicle condition.


Result:
Result Proceed to
w/ Adaptive High Beam System A
w/o Adaptive High Beam System B



A

2.CHECK FOR DTC

B

4.CHECK FOR DTC
2.CHECK FOR DTC

Pre-procedure1

a.

None


Procedure1

a.

Clear the DTCs.

Body Electrical > AFS > Clear DTCs
50002 165
Result:
Proceed to
NEXT



Post-procedure1

a.

None



NEXT

3.CHECK FOR DTC
3.CHECK FOR DTC

Pre-procedure1

a.

Turn the ignition switch ON and wait for at least 10 seconds or more.


Procedure1

a.

Check for DTCs.

Body Electrical > AFS > Trouble Codes
50001 165
Result:
Result Proceed to
B2415 is not output A
B2415 is output B



Post-procedure1

a.

None



A

B

4.CHECK FOR DTC

Pre-procedure1

a.

None


Procedure1

a.

Clear the DTCs.

Body Electrical > HL AutoLeveling > Clear DTCs
50002 361
Result:
Proceed to
NEXT



Post-procedure1

a.

None



NEXT

5.CHECK FOR DTC
5.CHECK FOR DTC

Pre-procedure1

a.

Turn the ignition switch ON and wait for at least 10 seconds or more.


Procedure1

a.

Check for DTCs.

Body Electrical > HL AutoLeveling > Trouble Codes
50001 361
Result:
Result Proceed to
B2415 is not output A
B2415 is output B



Post-procedure1

a.

None



A

B